I have a Tek 468 scope my son in law bought for me for fathers day last year. It has been working fine until 2 day ago when I pushed the power button and nothing happened. Both fuses are fine I have 121.5 volts on the line side of the IEC connector, the same on both sides of the fuse and J108. No voltage anywhere else. I'm not a scope guy and have never tried to repair one. I would like to know if there is a known common point of failure I should check for first. Looking at the schematic shouldn't I see some voltage on J110 with the power switch closed? Hope this makes sense. I will try to post a picture of circuit.
any thoughts are appreciated
Michael
