On Thu, Nov 1, 2018 at 06:52 AM, David Kuhn wrote:
I got a 2465B, 400MHz, while dumpster diving a while back. It seems to work
perfect. I do not have a lot of use for an Analog scope, (especially w/o
GPIB) but if I decide to sell it on EBAY, or even if I decide to use it for
trouble-shooting, I need to clean it up. There is some dried liquid behind
the BLUE crt filter (maybe cat pee).
Beside the four torx screws on the bottom, how to I take the bezel off to
clean it? i remember reading where it is real easy to break the knobs
removing the bezel. I assume only the four knobs under the CRT need to come
off?
Dave, wow what a dumpster find, congratulations you won the lottery. Just in case and for future references, I've heard people had very good results removing those stuck knobs by carefully heating them up first with a hot air gun. After so long, it seems most are indeed stuck and will brake if forced to come off. By warming them up they slightly expand and slide off much easier without harm. Hope that is useful information.
Alex
