Hi Denis,
Unfortunately no, but the trouble is limited only to those axial types.
When it comes to low ESR 105*¡ã*C I usually stick with
Nippon/Rubycon/Nichicon, and these (modern) are all radial (I get mine from
China via eBay, local dealers in my country have a really poor selection in
this category).
Other caps in this PSU are easy to match in size, e.g. Nippon has a decent
selection of 100V parts, and since you don't really need the highest spec
parts here you can easily find replacements. IIRC the 12.5mm can diameter
is OK for the +54V and -54V rails, and most of these are short in height.
And I readily use larger values when recapping PSUs, sometimes up to twice
the original value.
Anyway, I kept the old caps for sentimental reasons, maybe someday somebody
decides to make an exact restoration...
Best Regards,
Nenad Filipovic
On Fri, Oct 5, 2018 at 5:56 PM Dennis Tillman W7PF <dennis@...>
wrote:
Hi Nenad,
Were you able to find exact replacements, including same form factor, for
the filter caps in your 7854?
If so do you recall where you bought them?
That would save some of us with 7854s that will need to freshen up our
power supplies the time consuming task of locating exact replacement power
supply caps.
Thanks,
Dennis Tillman W7PF
