Hello,
I just finished recapping my recently acquired TDS520, and I have almost no
change in the problems it is having or the errors that it is giving. I have
uploaded a photo of the error log after startup and SPC calibration, it is
in an album titled TDS520 error log. It fails on the processor, acquisition,
and attn/acq interface every startup. There is also a very large offset for
both traces, most of the time they are off the screen and cannot be brought
down. When I was recapping everything I looked for any other damage from the
capacitors, but saw nothing significant. Most of these error messages im
getting seem pretty cryptic and im not sure where to really begin to look.
Thank you.
