Hi David,
I purchased some plastic rod some time ago, but it was 6mm dia. The
materials were Peek, Nylon and Glass-reinforced Nylon. They weren't horribly
expensive (except the Peek was the most pricey) and I think I probably got
them from RS in the UK. You could do worse than having a look at their
website to see if they do 1/8".
Good Luck, Colin.
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] [mailto:
[email protected]] On Behalf Of David C.
Partridge
Sent: 07 July 2018 18:27
To: TekScopes
Subject: [TekScopes] Source for 1/8" fibreglass or other hard plastic rod in
UK
I'm looking for a UK source of 1/8" (0.125" or 3.2mm) diameter fibreglass
rods (or other hard plastic) such as is used in many 7000 series plugins.
For the specific application (the rod down the middle of plastic expansion
rivet) a 3mm rod won't do.
I only want a small quantity, so any suppliers with large minimum orders
would be a problem.
Thanks
David
