Hi all, first post here.
I'm looking to set up a TM 5000 series mainframe and trying to sort out the compatibility gotchas before I "pull the trigger" on one of these.
My main interest is in the differential amplifier plugins. I do mostly audio work and these are the ones I am thinking about:
5A13
5A19
5A20
5A21
5A22
5A26
AM502
Question #1) Will the AM502 work in a 5000 series mainframe? (there seems to be conflicting information about whether or not 500 series plugins work in 5000 series mainframes)
Question #2) If I get a 5000 series mainframe with Option 2 (w/ the BNC connector panel on the back of the unit), would I be able to wire from an A5xx plugin's single ended output to a BNC connector on the back panel, and then connect this to a standard o-scope input?
My understanding is that Tek 5000 series scopes' baseline sensitivity is 10 mV/division, so I'm assuming I can set my scope to 10 mV/division, hook up the BNC out (wired to the A5xx plugin's output) from the back of the TM 5000 series mainframe and just plug it into my scope. Does this sound right?
I really appreciate any advice you have about this.
