I saved detailed notes and photos in topic and photo album titled "453 HV Transformer Rewind". Maybe it will be useful, but you will have to figure out your turns counts unless someone else here knows.
HTH,
Dave Wise
________________________________________
From:
[email protected] <
[email protected]> on behalf of jrodriguezcsb@... <jrodriguezcsb@...>
Sent: Tuesday, June 12, 2018 2:18 AM
To:
[email protected]Subject: Re: [TekScopes] Help with a TEK 502 scope
Hi Albert,
I have been reading in both the forum and the internet and I found quite interesting info like this page:
Unfortunately, I do not have 2 HV windings, in fact I have 3. I have 3 diode tubes in the secondary...
In this forum however I have not found a clear procedure, I found several links to a previous Yahoo group but I can not access.
I will try to upload photos in that way - thanks for the advice : )
I looked in Ebay and only found a 300USD with another 250USD of shippings, as in the programming fiel, it is out of range... and in bad shape
Anyway, any idea about:
1. Anyone who sell one for parts or just the parts
2. Rewinding it
Thanks for all this support, you are such a nice guys!
