Lee, thanks so much for your help, repeated trial fits, and great photos that clearly showed what needed to be changed. I'm glad the final product worked out for you.
I'm looking forward to working with you on feet for the 24XX family!
Jeff
________________________________
From:
[email protected] <
[email protected]> on behalf of Lee Houde <houdatto@...>
Sent: Thursday, March 29, 2018 7:15 PM
To:
[email protected]Subject: Re: [TekScopes] Back feet for 335 scope
Hi Jeff - I got the final version of the feet today & put them on my 335,
they fit and look beautiful!
I'm going to look through my collection of 2445's to see if I can find one
good foot to send you a picture of. I'm guessing they are a high breakage
rate part and likely common for the 24xx family so probably a fair demand.
They are a fairly large part though; they run vertically up the back of the
scope on either side so they are close to 6" high, 1/2" wide and 1-1/2 inch
deep. They are not solid though, there is a lot of open space. Kind of like
a tall, skinny, rectangular letter "D" with tabs at all four corners.
On Thu, Mar 29, 2018 at 4:50 PM, Jeff Davis <n0dyjeff@...> wrote:
Good thought. If Bert doesn't do that, I will when I get the photos.
________________________________
From: [email protected] <[email protected]> on behalf of
toby@... <toby@...>
Sent: Thursday, March 29, 2018 1:31 PM
To: [email protected]
Subject: Re: [TekScopes] Back feet for 335 scope
On 2018-03-29 3:19 PM, Jeff Davis wrote:
Hi Bert,
I think you want to send the photos to me, not Lee (Lee was test fitting
the feet on his 335). I was the one who
sent you the samples. You can send the photos to me at
n0dyjeff@... or jeff@....
Thanks!
Jeff
It might be good to post pics to the gallery here, for other people
contemplating ordering replacement feet?
--T
