Hi Bert,
That would be great. Even though the foot has the same part number on the 314, it would be good to confirm correct fit on that unit. Let's wait until I get results from Lee - I actually sent him several variants to try to get the best fit. Once that's determined, I can send you a sample of that size.
PM me your address, please.
Jeff
________________________________
From:
[email protected] <
[email protected]> on behalf of Bert Haskins <bhaskins@...>
Sent: Thursday, March 15, 2018 9:39 AM
To:
[email protected]Subject: Re: [TekScopes] Back feet for 335 scope
On 3/15/2018 11:07 AM, Jeff Davis wrote:
Hello all,
Here's an update on the project to develop replacement back feet for the Tek 335 scope. Lee Houde has graciously provided me with a sample foot, which I've measured and modeled. I sent a first set of samples to Lee, which he fitted to his scope. They worked and were usable, but not perfect. Lee gave me some great feedback and some photos which I used to revise the models and print a second set. They're on their way to Lee now. With any luck they'll be a great fit and I'll send out another update to the group at that time.
Jeff
If you would like another tester, I would be happy to volunteer.
I have a 314 and a 335.
Thanks,
Bert
