Hi all,
I consider myself lucky, because today my 2221 I bought on Ebay -as defective- arrived.
The really good news: it is not broken at all.
I assume the previous owner just not knew what buttons to press to see the traces, or get them triggered.
Being on X-Y did not help either, I think.
Now to the things that DO need some attention: The broken knobs.
To make it complete I need the following 4 items:
- One of the Vertical "cal" knobs is damaged. The size is about 10mm at the bottom, 9mm at the top and 12mm high. Shaft diameter is appr. 3.1mm, 0.125".
- The little "Select" button, this is the one that selects which cursor to adjust. I could not find a partnumber for this so far. Shaft diameter is appr. 2mm, 0.078".
- the "Time Base" knob is damaged, the transparent 'skirt' is still OK. The size is about 18.2mm at the bottom (not including the skirt), 16.9mm at the top and 22mm high. Shaft diameter is 1/4", so 6.2mm.
- And finally, the Pull to x10, and rotate to adjust the calibration knob is missing. I believe the partnumber for this is 366-0641-00. The shaft diameter is 3.1mm, 0.125" too.
So far I found the first one on Ebay and with Qservice, but no luck for the other 3...
I hope somebody here can put me on the right track to obtain these missing items??
I try to include some pictures here:
Un saludo,
Leo
satbeginner