Yes, the 130 is quite a nice LC meter. I got one a few years ago, and found it to be in very close (<1-2% about as good as I could resolve on the meter) agreement with some pretty good reference caps, as was. Not bad for a 50-60 year old instrument. I've gathered up some spare tubes and other maintenance stuff for it, and plan to make some special probes to go with it. I found that you can extend the measurement point out from the DUT port connector by up to 2-3 feet if you use 75 ohm cable, and still have enough offset range to zero it. I did some experiments measuring scope input C with this setup - it works great as long as the R is high like the 1 megohm standard inputs.
