Ksmith,
?
I just finished recoring my entire deck with balsa. Some of it was 3/4 and most was 1/2. After I got about half way through I was told I should have used foam core but had already bought the balsa. I have plenty of 1/2 left for your job if that is what you need. I doubt I will evey use it.
?
After several false starts?I ended up using a battery powered skill saw with a metal cutting blade to make my cuts as I did a panel at a time. You can only mix up so much West System at a time. I'm at 7 gallons and counting.
?
Call if you are interested in the 1/2 inch!
?
Billy Ray Davis - Scarlett #79 - W803 788 8877
?
ksmith4312 wrote:
Hi,
Was doing some work and noticed a soft spot on deck. Have
determined it is about 2' X 3'. Will be doing some work. I have found
some great sites for the work but no one has suggested or recommended
core material. Balsa, Marine Ply or Nico-Honeycomb. All two cents are
welcome.
Looking for last minute shopping deals?
