开云体育

Buy one of each size, then return the one that does not fit. They are cheap.

I can't bring the bailer to the store with me so i need to now exactly, anyone?

Go to Home Depot standard pipe thread size pvc plug. I wasn’t to say 1 or 1-1/4.

Can anyone tell me the size and threading of the brass screw top plug for the Sunfish bailer? ? Or the aftermarket plastic replacement?I'm trying to temporarily substitute something while waiting for

*Cancelled: Gifford Pinchot Sailing Club Fall race #2* This event has been cancelled. *When:* Saturday, 15 August 2020 10:00am to 2:00pm (UTC-04:00) America/New York *Where:* York PA *Organizer:*

Thanks all that contacted me, but I have one being mailed tomorrow. Supplier did say they were not expecting any before the end of Aug from the manufacturer. So 4 months and no auto bailer, then

I have one new one available. Contact me at cjo1023 at yahoo dot com.

I ordered one and it was on backorder too. Eventually it came in about a year aftet. But they do come. Carey Seven

I built a Sunfish clone and sail 1-2 times a weekend and would really like? to add an auto bailer so as to not have to bail anytime I get hit by bigger waves or get hit by wakes from ski boats. I

Yes. The Rustoleum colors are a perfect match for everyone that I've painted. It really makes the boat stand out when you take the time to do it right.Tom

Thank you for the help

Hi All part of coaming had become dislodged ?from the boat and I wanted to fix it by replacing the rivets

I don't know Andy's reasons but for me, the coaming had a small chunk missing from the previous owner dropping the mast on it in transport, and the front side of it had been improperly glassed

Hi Andy, Why are you removing the coaming? I removed mine when I painted the deck and wished I hadn’t! I was able to reattach it once I ordered the proper rivets, but rivnuts (which I had on my

A friend of mast broke her mast this past week.? Anyone got a used one for sale.? Eastern NC 252 342-0635 Mr Mike

Depending on the age of the boat, the coaming is attached with rivnuts, screws that go into a rivet-like base. If there's no screw slots, you have regular rivets, which can be carefully drilled-out.

Hi All what is the easiest way to remove the rivets from a coaming without breaking it Thanks, Andy

Dear Group, Can anyone recommend a Sunfish repair person that may make visits in the Catskills, NY area? Thank you, Rick

Put inspect port in middle of back deck.? When you pry off the fiberglass circle,? leave as much Styrofoam as you can,? but it's OK to remove brown/ yellow 2-part expanded foam around it.? That is

When you cut the hole for a 5” inspection cover you will have to cut some of the wood and also the foam. I used a jig saw to get a nice circle and a keyhole saw on the foam. The mounting hardwre