Depending on the age of the boat, the coaming is attached with rivnuts, screws that go into a rivet-like base. If there's no screw slots, you have regular rivets, which can be carefully drilled-out. I use a spade bit or a conical bit and press lightly to erode just enough of the center of the rivet to detach it from the shank.
On Sunday, July 12, 2020, 2:19:15 PM CDT, Andy Stinson via groups.io <andy.stinson@...> wrote:
Hi All what is the easiest way to remove the rivets from a coaming without breaking it?
