开云体育

I have always just passedd smog here in AZ. More specfic questions ? Sean G87 Syncro, 2000 Subie 2.5 SOHC On Monday, May 26, 2025 at 03:33:10 PM MST, Gary Helbig via groups.io

Can you describe your Westy? What year and what engine? The reason I ask is that in CA there a few shops besides Transwork that you may want to consider sending your transaxle to for repair. Nathan

Sean, Please tell me more about your setup. AZ smog requirements are very similar to NV requirements.? Long story shortened, I was able to use an AZ smog check to renew a NV registration. Gary.

Thanks for that - we might end up there. I got with Nathan at Vivid Vans to get an assessment tomorrow morning. If it is a failed transaxle it looks like the best options are a rebuild in El Cajon or

Hey Bob, sorry to hear about this. Sounds like you have an auto transmission, which only a few folks work on these days. But literally ANY shop could drop the trans for you and send it back to El

Great idea. The tranny I have is from Transworks. It has a 3.08 rack and pinion set, a 3 pad torque converter and a “remote cooler kit” Do you know if the GoWesty specs are similar? Thanks Bob

IN my Subie conversion I found it easier, quicker and less costly to just get a whole transaxle assembly from GoWesty. If you have the complete assembly on hand most any garage can change it out for

Thanks! Headed to Vivid Vans in Santa Cruz. Much appreciate the tip, and having this forum. Best Bob BobGemmell.Com

None that I know of in Salinas. There's 2 in Santa Cruz you could call: D&K Volkswagen (831-475-9669) or Vivid Vans (831-201-4894). Both of these shops will most likely send out the transaxle for

My Westy conversion transaxle has failed in Salinas. Anyone have repair shop recommendations for this area? Thanks Bob BobGemmell.Com

Hi Joel, We were up near Tadusac a couple of years ago, doing some canoeing, hiking and whale watching. We won't be heading out towards Labrador until the end of Busfusion. Either the Sunday or

Hi Terry, Sorry for the delayed response. We didn't go to busfusion, headed out for Labrador on the 20th. We have been taking our time heading out, currently in Tadoussac Quebec. The weather has been

Pics would help. Edit: check here for engine wiring diagrams for your year. Wire colors may vary. https://jdmfsm.info/Auto/Japan/Subaru/

Hey all!! I have diligently labeled and sorted my wiring harness and I think I should be able to test it before installing when my OBD2 Bluetooth dongle arrives tomorrow. Huge thanks to the

I used the Smallcar engine carrier and intake and the Outfront Motorsports adapter plate, flywheel and shortened pan. Stan’s Headers exhaust manifold. The LUK clutch I installed was good for 80,000

I already have a suburb 2.5 that was recently professionally rebuilt.? I read small cars clutch could be problematic but the article was old.? Just want to start with solid parts but have to order

Routing the ducting up the pillar is no problem. As you mentioned, the tough part is working around the A/C lines. It is a tight fit and I believe I had to bend the mounting bracket just slightly to

I have found the Bostig Kit (2000-2004 Ford Focus base) good: lots of them out there for next to nothing, and Jim Akiba is so good at answering any questions not covered in his online manual: that

I’ve ordered the Smallcar intake with snorkel. Was it difficult to get it mounted up the column? ?Also I’m a bit concerned because I have AC hoses and wiring back there in my Westy. Hope it will

Great idea. -- Warren 89 Westy 88 Tintop 70 Westy