开云体育

Hello, Check out this link for auto parts. Looks to cover a wide area. Good luck, Ray

Hi Brian, Try page 38. Darrell http://users4.50megs.com/alexcajeaux/subaru/90LegacyShopManuals/Engine/2-7FuelInjectionSystem/

Hi Warren, Thanks for the kind words. First I am spent my working life as a technician not an electronic engineer. If you know one by all means get advice form them. I would try a hall from

Hi Steve, My van is 2wd but the spacer is needed to compensate for the diffrense in wheel offset.Offset of standard Vanagon wheel is 35mm, Audi wheel offset is 45mm. So the diffrence of 10mm=.39" and

it). radiator,

--hello john i have installed a front fill radiator in my 1986 westy . Im currently in longmont co visiting if you want to take a look at the car.mail me back with your # and ill give you a call danny

hi all- still havent cured my no-spark problem. some time ago, somebody posted a troubleshooting guide from the subie manual. does anybody know the address to this page? i really wanna drive this

Hi All, I've ordered the kit from KEP and motor from a 93 subi to cure my "thrown rod problem" in my 87 syncro. KEP sent me some docs early and looking them over I already having wiring questions

Darrell, Thanks so much for your always helpful posts to our list. I'm one of the non-electronics educated on the list and so looked up the following site on "hall-effect"s to find out just what this

Mark, The yellow wire from the round plug on the Subaru alternator is spliced into one of (mine has two) the VW black "ignition on" wire that come from the black junction box in the engine bay. Warren

I am in the middle of wiring hell and I spliced the yellow wire from the alternator to somewhere but it unspliced itself and I cant figure out where it goes. Any help would be appreciated. The wiring

Thanks. Wow. Appreciate that. Hey, a few questions sir. Are you saying I need spacers on my syncro as well? Or JUST for the non syncro applications? i have a reg van as well. They seemed to fit fine

You will need spacers too.I got the same wheels and used 5/16" thick alum. spacers and it works clearing all suspension parts.Reaming out the center is critical part and has to be precise for wheel

Hi Larry, We had some vss discussions last summer. I remember taking pictures but I don't think they are posted yet. On a 2wd 3 magnets on the o2 counter shaft will be about right. We are using 4 with

Darrell Boehler wrote: Darrell, Would you have part numbers and/or wiring diagram for this mod? Thanks, Larry

Great post. thanks. Any pics of these wheels? I am currently modifyng some 15 inch Audi Ronal alloys with the 45 mm offset. Got them at a yard here in Seattle. Painted them silver with a clear coat

Hi All, My son Tom has after market mb allow wheels similar to what Nelson described a couple days ago. 5x112 bolt pattern, 7 inch rims with a 25 mm or 1 inch off set. They fit his 86 2wd westy about

Still, the Japanese market gets 290hp versions, which are sold nowhere else. Though you won't hear about them, I was sent a factory power/torque graph of theold-model Type RA engine, which I came

I went to the LA Auto Show today and found a couple of interesting tidbits I thought I'd share with the group. A Subaru rep informed me that the Impreza WRX will be on display next week at the show

US models... coz the poor fools missed out on the WRX and it's derivitives :-b Allan.