Re: persistent backfire popping at deceleration
I get an error 33, the speed sensor as it's missing. error 21 for the coolant due to the filling & bleeding I presume. Error 24 the Idle Air Control. I don't know why I would get that one but I tried
By
John <jfleming3@...>
·
#1950
·
|
Re: interested in conversion
http://www.ep.com/js/mi/c0/b0/v0/1019911.html Your in luck. Check the ep link above. I bought my van from a guy who did the install himself. He did a great job. He lives in Boise. -steve ----Original
By
Steve Coseo <roadcamp@...>
·
#1949
·
|
Re: persistent backfire popping at deceleration
wrote: a There is no error code flashing for the O2 sensor so I think it is OK. I used the original one from the used engine. I will check it out. Thanks. John
By
John <jfleming3@...>
·
#1948
·
|
Project Update, burst coolant line & exhuast question.
I had a little bit of a setback this weekend. I started putting water in the system, and water started pouring off the gas tank. Found out one of the metal coolant pipes had burst right above the
By
david wilhite <dnmwilhite@...>
·
#1947
·
|
interested in conversion
howdy folks. its been almost 2 years since i sold my 84 camper because i was so disatisfied with the engine, but now i am itching for another. i don't suppose that anyone has a camper with the subaru
By
kstoppkotte@...
·
#1946
·
|
no spark- HELP!!! ignitor problems??
hi all- having some conversion trouble. i have fuel, but no spark. i went over my wiring harness, all seems ok.also checked the crank and cam sensors got a small amount of resistance, so i believe
By
SBWC919@...
·
#1945
·
|
Re: Why I hate UPS (was: Vendors and shipping)
Add Fed-Ex or any other courier to that list too - I had a customer return an item to me and *I* had to pay $80 CAD in brokerage and duty to get the item back. US Mail is the only way to go to get an
By
David Marshall <VANAGON@...>
·
#1944
·
|
Universal Remote Starter with 1990 Subaru Legacy 2.2liter
I need some advice prior to using this Hand Held remote starter: -Is there any item of electrical system I should disconnect B4? -If someone has done this B4, where are connections made? I do not want
By
68rvbus@...
·
#1943
·
|
Re: Why I hate UPS (was: Vendors and shipping)
Chris, I wish you had posted this last week. UPS is in the process of screwing me out of over $100 more than it would have cost with the postal service. And if that weren't enough to leave a bad taste
By
Lawrence Johnson <LARRY_AVERY.JOHNSON@...>
·
#1942
·
|
Re: persistent backfire popping at deceleration
Fit a big-bore pipe. I mean 4". Plenty of these here, usually on Legacys, Supras and Skylines. They come in on cars owned in Japan by boy-wonders. The cars are bought used there and imported. Sound
By
andrew.grebneff@...
·
#1941
·
|
Re: persistent backfire popping at deceleration
Hi. I am considering changing my stock van muffler. Does anyone have any suggestions as to manufacturer and model? I want that soob to breath... -steve PS. just installed 15 South African wheels and
By
Steve Coseo <roadcamp@...>
·
#1940
·
|
Re: persistent backfire popping at deceleration
John, It is indeed very unusual to hear about this problem with Suby. Are you getting any error codes?There should be 3 codes after conversion not affecting any function. Did you do conversion
By
Leon Korkin <korkwood@...>
·
#1939
·
|
Re: Timing Chain Job - 1990 Subaru Legacy
This is the problem with front-engined boxers. The engine is wide, and vulnerable in corner impacts. I have passed up 2 SVX engines with accident cam/head damage. Andrew Grebneff Dunedin, New Zealand
By
andrew.grebneff@...
·
#1937
·
|
Re: persistent backfire popping at deceleration
o2 sensor OK? had on
By
John Seehorn
·
#1938
·
|
persistent backfire popping at deceleration
My 93 Legacy installation has an annoying problem. It has always had a popping backfire when decelerating. especially when coming to a stop or hard deceleration using the engine. I have under 20,000
By
John <jfleming3@...>
·
#1936
·
|
Re: Timing Chain Job - 1990 Subaru Legacy
Your Suby engine has timing belt, not chain and you can't damage valves by turning engine. To see the damage you have to remove timing belt dust covers and check camshaft sprockets for damage.I
By
Leon Korkin <korkwood@...>
·
#1935
·
|
Timing Chain Job - 1990 Subaru Legacy
I am new to this site. Trying to investigate my recently purchased Subaru which was wrecked slightly in the front at the time I purchased her. Here's my questions: (1) If car was hit, approx. 10mph,
By
68rvbus@...
·
#1934
·
|
Re: Subaru Power Output Graphs
The Legacy or Impreza 2.5l engines that might work were from year 1997 till current. They all make 165 hp and 162 lb/ft of torque.The big "but" is need for custom made exhaust, more complicated and
By
Leon Korkin <korkwood@...>
·
#1933
·
|
Subaru Power Output Graphs
Dear Converts, I am still researching the drivetrain combo to install in my 90 Vanagon when it goes south in an estimated 25k miles. I sure would like the six mated to a G50 tranny, but the amount of
By
Nelson Stoll <info@...>
·
#1932
·
|
Re: Wiring Schematics Manual
A word of caution: As I read the table of contents, the SVX is NOT included. The XT6 is and several others are.
By
Bobby Yates Emory <liberty1@...>
·
#1931
·
|