开云体育

Hey Warren. Just wanted to thank you for sharing your engine refresh pictures and writings. I have to say…..a powder coat kit may have to make it’s way to my Christmas wish list this year!!! Great

Very nice

I only temporarily installed the alternator and ac compressor because I have to remove them to hook the engine to a hoist, which connects to the ac bracket. ?I’m very happy to have it this far

Other than belts and torquing a few bolts, this engine is ready to install. -- Warren 89 Westy 88 Tintop 70 Westy

Hi all, I’m trying to get the Alternator light working correctly as it currently stays on. I’ve looked at Weide guide but my 85 has a different style fuse panel and I have searched this group and

Ground wire to the neutral switch pin.

On mine you have to ground a terminal. I assume you have the pin out? On Thu, Jan 30, 2025 at 7:28?PM Christoph Altehoefer via groups.io <cac@...> wrote: Hello again, still working

I posted my issue on thesamba and got an instant answer. ?A member by the name of Go Everywhere posted this: “ I believe thats the Subaru starter negative cable bracket. Part number 22442AA021. You

Hello again, still working on my new harness conversion, 2004 Impreza AT going into a '91 MT Vanagon. How do I tell the ECU that the vehicle is a MT now? On the ECU I/O signal sheet I can't find a pin

Do you have a bolt that fits it?

The part definitely came from the Subie. I’m still driving the Vanagon (drove it to Buses by the Bridge in Lake Havasu). -- Warren 89 Westy 88 Tintop 70 Westy

Here’s the alternator bracket. It’s very similar to the other. I’m still searching for the other bracket’s home. -- Warren 89 Westy 88 Tintop 70 Westy

Looks like a fuel or vacuum line mounting tab ? I looked at mine and don’t have that one anywhere, assuming you mean subie part not vanagon part

Thank you Andy. ?Although they look quite similar, I actually have the alternator bolt bracket. ?So I’m still stumped. ?I’ve looked at many of the photos I took when disassembling it, but I’m

I'm going w. Alternator bolt bracket Andy Vanis 505-304-5306 USA and WhatsApp [email protected]> wrote:

I did a pretty good job of labeling parts as I disassembled the engine but apparently I missed this one. Can someone help me identify it? ?Many thanks! -- Warren 89 Westy 88 Tintop 70 Westy

The lower bolt ?had red thread locker on it when I pulled it out so I used red again when I reinstalled it. All others got blue. -- Warren 89 Westy 88 Tintop 70 Westy

I bought the plug wires a the Subaru dealer. I hope they work okay. They were a bit shorter than the old ones on the engine. They all went on okay but the number 3 was almost too short. -- Warren 89

Shiney! That lower PS pump bracket bolt stripped out on me after taking the pump off a few times. I don't think they need Loctite. Are those OE Packard plug wires? I found the NGK blue wires worked

I used a black one with the steel mesh. It works alright.