开云体育

On my 10K I could take a .060 DOC no problem. On Jun 24, 2023, at 8:20 PM, Steven Schlegel <sc.schlegel@...> wrote: ?I have a simple question. How deep of cuts do you normally make? I have

I have a simple question. How deep of cuts do you normally make? I have a 1949 vintage SB9C, with 6 speeds. I replaced the 1/4 hp motor with a 1/2 HP one. I use carbide a lot, but HSS still gets used

What a shame. All that rust. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Saturday, June 24, 2023 12:09:57 PM To: [email protected]

Anybody interested? On ebay. I have no connection with the vendor or

Come on, we all know it's a 'parts lathe' to keep yours running in case of accident since it's antique and parts aren't made any longer... I'm sure several of us would write you letters of reference

I think the lathe is big enough to slide a mattress under it, until the wife calms down. Go for it! ________________________________ Sent: Friday, June 23, 2023 12:54 AM To: [email protected]

yes <gmeinschein@...> wrote:

Hey all, https://jerseyshore.craigslist.org/tls/d/neptune-southbend-lathe-model/7610634092.html $1500. ?I can see that it has a double tumbler, taper attachment, thread dial, a steady rest and a

First, let me be clear that I don’t get much oil on the flat belt. I use a serpentine automotive belt, and the oil doesn’t seem to affect it adversely. If it does, I simply tighten the belt. I

Any belt will slip if you get oil on it. I have several machines, getting oil on the belt has never happened to me. How are you getting oil on it?

How do you manage to splash your pullies? ________________________________ Sent: Tuesday, June 13, 2023 5:38 PM To: [email protected] <[email protected]> Subject: Re: [SouthBendLathe] V

Yes “Tools for Cheep” Jeff Beck. I was aware he retired but thought I should mention it as a possibility. Jim B,

I believe you are referring to “Tools For Cheap” I purchased one from him for my 9a. Unfortunately, he retired and is no longer there. Al Sent: Tuesday, June 13, 2023 5:27 PM To:

I have a link belt on my SB9c and it slips a lot. In the machining environment, it's impossible to keep oil off the pullies. It's smooth, but if it doesn't transfer the power... Steven S Get Outlook

Thanks a lot Animal. I forgot to post there. Just now made the post. Greg

Thanks Jim. Don't suppose you have any other info on who he is or how I could find him? Greg

A Gates V belt should be as close to perfect as makes no difference! An earlier post suggested warming it to ease the storage deflections out of it. I'd do it in a bucket of very hot water, not

Get an Accurate-Link belt. They are available at Harbor Freight. ?I run these on all my machine tools.

??? ??? You might try over on? the South Bend group over on the Practical Machinist forum https://www.practicalmachinist.com/forum/categories/south-bend-lathes.25/ or email Ted @

There used to be a Vendor, who had Steady’s to fit most of the SB lathes. They were custom made in China. His first name was Jeff. I can’t remember the company. I had one for my Heavy 10.