开云体育

Are these the same as the 3C collets? If yes, I might be interested, depending on what sizes you have available Best

I bought collets for a SB-10Heavy. However, they turned out to be SB-3 collets for a SB-9. That's why they are for sale. Trading for a SB-10-Heavy drawbar to fit SB-2 collets is also an option. In

Our 1943 14.5" has a single sliding lever plus 3 position on top plus in out plunger at the change wheels. ?Hope you can give it a name from that description. ?When stripped, I discovered that

When I bought my SB13 it made a huge racket when I used the gearbox. I used this to negotiate a better price. When I got it home, I tore it completely down for a refurbish before moving it into my

Hi There, When oiling the gearbox, it is desirable to point the nozzle? of the oil gun up under the skirt of the gearbox casting and squirt some oil up onto the cone gear cluster the lever

???? if it's any thing like the 9A gear box it counts on the oil traveling through it's reservoir & going through the casting oil passage's & the finally to the oil wicks in the gear box that lube

I have a 1947 vintage 13 inch SB with the single stumbler quick change gear box. I don't use the quick change very often, but today when I used it, the longitudinal feed seem to work like normal, but

Thanks very much for the information, Webb. You wishing me good luck worked! Due to Boone Testerman's excellent "Southbend apron and saddle rebuild 9A" at

Hi There, If I am understanding you correctly, you are referring to the hole in the worm in the apron and the round take-up nut that holds it in the apron casting. The castings are not real hard and

If ya have any brass @ teh size of the key ya can try to make one just undersize to see how it works ? Is the leadscrew adjusted so it runs true without binding ? Is the lead screw all cleaned out ?

Hi guys, I been following some interesting and informative posts and now I have a question of my own. What is the acceptable end play for the worm in a 9A? With the holes in the key slot and nut

John, when you finally get one, let us know what you got and how it worked out. This was a very interesting thread (pun intended), despite the fact that I don't have a 13" lathe. Cheers Best

Here's the one I made: https://www.homemadetools.net/forum/portable-bandsaw-stand-67776 There are others there, some are arguably better than mine. Neil

Hello all of you that responded to my post. I appreciate all the information you imparted. ?It will make my decision a lot easier. ?Thank you. John GrumpCell 715-829-4559

There are a lot of YouTube videos on converting those to vertical BS. Some good. Some bad. Al-USA

Proud of it, aren't they?? Try searching at: https://www.homemadetools.net/forum/search.php?searchid=4727145 I bought the Hercules stand at HF, and they're on sale IIRC. Does both vertical &

https://a.co/d/92gW1Z8 Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Tuesday, January 7, 2025 11:58:17 PM To: [email protected]

Hey folks , I have this old Milwaukee porta band that has ben hanging out since i retired . It's a lot heavier that I remember them being . Have any of you come up with a bench or even a free standing

Thanks. Will have my son start printing. [email protected]> wrote:

"DJ Delorie via groups.io" <dj@...> writes: I put what I had online: https://www.thingiverse.com/thing:6904691