Hi There,
?
When oiling the gearbox, it is desirable to point the nozzle? of the
oil gun up under the skirt of the gearbox casting and squirt some
oil up onto the cone gear cluster the lever engage.
?
Gears that "rattle" when engaged usually are not properly meshed
or engaged completely.? Are sure the noise is coming from the
gearbox? Could it be from the gears on the banjo bracket?
?
The gears in the gearbox are fixed on shafts and really cannot get
out of proper mesh unless there is something broken or very worn.
The gears on the banjo bracket (referred to as the end gears by some)
are mounted on shafts that can be adjusted to change the gear
position and hence the meshing of the gears.
?
Good Luck!
-Blue Chips-
Webb
?
