开云体育

Al Knack

https://www.irfanview.com/ Free and lets you crop and resize a photo to a more reasonable size like 480x640 etc. It can also compress to 80% so a 8MB photo can be turned into a 100K photo that

Need photo of your lathe so we can determine your headstock cover style. South Bend had several for the 10K. Sorry we got side-tracked on lather covers! Here's a photo of mine. Bill Nelson showed

Sgt. Meyers, did you have anything to do with 99125 in the Air Force? I was at Lowry and Fiji and your name seems familiar to me. Former SSgt Woellhaf

That's cheating, but it can work if his camera doesn't make absurdly large files. My new phone? camera can do a 50megapixel file, supposedly... My email provider allows 25mb files. This group is,

Just attach the photo to your reply. It will show up in the message. Jim B,

Go to the group.io website, and look at your groups. If you have membership in more than one, pick southbendlathe, and on a Windows computer and most of the browsers out there, on the left side of the

Question: is it the belt cover on a bench model, horizontal drive? If so, I have that particular cover with the lubrication chart intact. If you would like a photo please email me or explain (if you

I had a good look at my 10k today, mounted on it’s own bench w/drawers and pulleys. When lowered, my cover pushes down on a shaft to allow the belt tensioner arm to lock. Not sure if the 10k was

??? Barbi Q covers work nicely too ??? animal

Unless I'm mistaken the OP really means "headstock cover" not something to cover the lathe. Here is what I think he's talking about. Oh look I have a sheet too but that's not a headstock

But it's so much fun! Try the "naked on the saddle" position, or just "Riding The Tailstock In The Rain". ;)

I doubt anyone would run a draped-over lathe. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Sunday, June 30, 2024 12:21:36 PM To: [email protected]

I keep my smock on mine so I know where it is

Sorry Paul. I have a master power switch to the lath and it’s light. The sheet is moved before power is turned on. Plus it is a flat belt that slips if to heavy of a load is applied. Plenty safe

My metric QCGB has obvious metric threading numbers on it…. not like the imperial one in threads per inch. Plus the leadscrew pitch is 3mm. al.

Sure you do that and get it cougt under the belt GP

That's what I do. Either a bed sheet or an old bath/beach towel Al From: [email protected] <[email protected]> On Behalf Of Andrei Sent: Sunday, June 30, 2024 9:36 AM To:

Just drape a cotton bedsheet over the lathe. Easiest way to handle it Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Sunday, June 30, 2024 8:49:19 AM To:

South bend never sold one. You either make it or ebay it. Or buy a motorcycle cover that is roughly of that size. Make sure it is not plastic, but cotton. Plastic will trap humidity inside and will