开云体育

Kinda depends on if you need to just empty the shop, or you want to get best money out of it, and if you don't or do have time to catalog everything. There are equipment dealers all over the country

Send a list here as well. We are all machinists. ________________________________ Sent: Monday, September 18, 2023 11:08 AM To: [email protected] <[email protected]> Subject:

Hi all, I have been lurking for a while.. I have a dilemma.?? I need to liquidate the machinery from my Dad's small tool and die shop.?? Most of it is Late 70's to early 80's.? It was all

If you don't have the Ilion rebuild manual I highly recommend it . Ya can buy it with or without wicks . Depending on the condition of yer lathe you may want/need the wicks kit . The book is a real

Hello all, Thanks to everyone for the replies I changed it to 10 in the end. I am sure I will more questions soon as I am going to thoroughly clean the lathe, and will want to know how to adjust

Dig the motor that comes with it… A real classic. Gary

https://sfbay.craigslist.org/eby/tls/d/rodeo-south-bend-lathe/7666223083.html Single tumbler with taper attachment $1,100 seems like a pretty good price animal

not to mention each rotation is 0.10 tool movement animal

An advantage of going to 10 threads per inch is increased force on the jaws with each turn of the handle.

??? 9A gear chart https://www.practicalmachinist.com/forum/attachments/sb-9a-chart-jpg.337796/ animal

When taking pics like this, don't use the flash on your camera. It works better with the room lights on. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent:

Second marriage for both me and my wife; she has two sons from her first one.? If I'd been there from the beginning they'd be a whole lot handier.? I handed one my Ryobi and a box of deck screws,

Both my SB 9A double tumbler and SB 13" will cut 6 tpi.

Do you have any kind of Acme threading tool ? Are you contemplating grinding one? Does your lathe handle 6TPI? I checked my old ones. The Single tumbler Heavy 10 will. The 9” C can. I can’t find

I had a uncle like that , best dam'n door hanger I've ever seen . I've had so many people throughout the years tellin me how dangerous my? worm 77 is . I usually shut them up by showin them that the

In a similar vein, when I was in college and was visiting my girlfriend her father was doing some remodeling.? We stopped in to see how he was doing and he proudly showed me his shiny new piece of

That sounds like the right answer to me, as well. And you can buy 10tpi Acme thread inserts pre-ground. Though I haven't found one of the holders small enough for my Atlas lathe, and I don't have the

Ya can cut metal roofing & some sheet metal with a saw blade on backwards ,it's a lot more common then most folks would think . I even saw a guy use a chain saw with the chain on backwards . animal

Make a new thread and nut at 10 per inch. ________________________________ Sent: Monday, September 11, 2023 3:46 PM To: [email protected] <[email protected]> Subject: Re:

to quote..."I do like a good strong whiskey, or bourbon...." Indeed, a wonderful thought and practice... don't drive <smile> Be well and be safe - we all need each other. DBN aka John