If you don't have the Ilion rebuild manual I highly recommend it
. Ya can buy it with or without wicks . Depending on the condition
of yer lathe you may want/need the wicks kit . The book is a real
good one to have , I think I probably would have put my QCGB back
together 7-8 times if it wasn't for the manual .
animal
On 9/17/23 2:17 PM, Fred Flintstone via
groups.io wrote:
toggle quoted message
Show quoted text
Hello all,
Thanks to everyone for the
replies I changed it to 10 in the end.
I am sure I will more
questions soon as I am going to thoroughly clean the lathe,
and will want to know how to adjust it.
Take care,
Stoeger
On Wednesday, September 13, 2023 at 04:09:33 AM GMT+3,
mike allen
<animal@...> wrote:
not to mention each rotation is 0.10 tool movement
animal
On 9/12/23
4:27 PM, Robert Bradley wrote:
An advantage of going to 10 threads per inch is
increased force on the jaws with each turn of the
handle.
