开云体育

-- Harry Molwitz

I keep stopping at its a 3 & 1/2 ' bed . My 4' bed has limits at times . ??? ??? animal

That's kinda the book I was reading? on this one . It will probably sell though . It's still nice to see what is out there to get a barometer reading on things . ??? ??? animal

nice one ... if ways are good and i needed another lathe i would go $2000 for this ... 9 inch is a decent hobby lathe ... and collets are better for little hobby projects anyway ... cute !! ...

I think that's crazy $$ too. Though my 4' 9A was a bare machine with 1 chuck & a box of tool holders . I think I got a pretty good deal at $ 250.00 up in north east Ca . I was about to hop in my truck

Hi There, What I can see, that lathe doesn't have the correct SBL "flaking" pattern. Most likely, it has been redone.? There are people that do really good scraping? and there are people that make

I personally think that is insane money for a SB9A. I bought mine, a 1947, that wears it’s original paint, has the original flaking, came with 3 jaw, 4 jaw, collet closer, collets, taper attachment,

I have not, but once upon a time, it was the only way to get accurate machine tools. I have bought or downloaded several works on doing scraping, since I have a number of old machines that could use

I wonder if that's original flaking . I keep reading more about somebody saying that " they " re-scraped " the apron or other parts to bring the machine back into tolerance . From what reading I have

No association with this. https://boston.craigslist.org/gbs/tls/d/somerville-south-bend-model-9a/7579501093.html PG

Thank you to everyone who replied. I bought a 2-flute ?" coated carbide cutter and lowered the BXA-22 tool holder block 0.220". The steel was pretty tough, and acted like it was case-hardened, but it

Great info there, Mike! Thanks for sharing it! Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by:Good judgement comes from experience. Experience comes from bad judgement.?SEMPER

Here's a page with all the dimensions of the 4 main sizes of QCTP's https://www.ctctools.biz/quick-change-toolpost-set-6pcs-wedge-type-l137/ ??? ??? I bought my AXA wedge type? QCTP for my SB

Hit send too fast? too fast

The difference between a 201 vs a 202 is the 202 has a V cut in the bottom of the tool slot so you could also hold a boring bar or a round tool . Keep in mind if you have a 202 holder you cant use the

101 will, 201 will not Best Regards, Andrei D. Calciu 6371 Birch Leaf Court Burke, VA 22015-3528 USA mailto:calciu1@... ________________________________ Sent: Sunday, January 29, 2023 1:40 PM

Afternoon, I just recently acquired a QCTP (Phase 2 250-100) for my SB9c that came with a few holders.? 250-202, 250-207, and 250-110.? I will be needing additional holders, but am confused on what

I’ve taken some off the tool shank to drop the cutter on centre on a couple of my favourite cutters, worked fine.

Have done AXA holders with carbide tooling, no problems.

Genius idea! I'm going to try and trim the bottom of the block with a carbide cutter. If it doesn't work out, this will be my Plan B. Thanks! Don Sent: Wednesday, January 25, 2023 3:33 PM To: