??? Look in the yellow pages ( if they even still exist ) for a
commercial belting co . They will cut to what ya want & if ya
don' have a hangup with the alligator lacing they will lace the
belt. Last composit belt I hade made for my South Bend was 10
bucks cut to fig & laced . The lacing don' bug me one bit ,
its the same as tapping yer foot .
animal
On 11/30/24 5:46 PM, harry molwitz via
groups.io wrote:
toggle quoted message
Show quoted text
I would like a belt for a drill press 1-1/8 wide x
9 foot, I would want to splice it myself in place.
Let me know.
Regards
On Tue, Nov 19, 2024 at 07:00 PM, ww_big_al wrote:
I Like purchasing stuff from SteveWb
on eBay.
al
It looks like Steve sells some good stuff although I am
curious about his belts and splicing method. I used to work
for a printing company and took care of most the belts,
splicing and training for belts splicing. Most the belts
were for conveyors but many were rated as drive belts as
well. Anyway, all the belt suppliers told me "there was no
way to get a good strong splice without heat". They also
told me that there were cold glues available but recommended
against using them. I wonder is Steve uses a cold splice
method??
I've been retired for about 7 years now but just over a
years ago I found two spools of surplus 2-inch wide Habasit
F1 belt material.? This is very good belt and good up to
about 1.5 HP (possibly more). At the full 2-inch width it
sells for $13/foot and I'm selling it at any width for
$5/foot. I will splice for $5 and ship for $8.?
If you need to splice a belt on your lathe I can accommodate
but the heater, guide and glue will add a 1-time cost of
about $40.?
So a continuous (pre-spiced) belt might be $28-38 bucks and
if you want to splice it yourself it's more like $68-78
(depending on length needed).
I've sold about 400 ft and have about 280ft left. Its not
selling super quick but once its gone I'll be out of the
belt business. New belt is just too dang high priced!?
Send me a private message if you are interested in a new
belt and I'll give you price.
Include the length needed and tell me if you want it
pre-spliced. (US Shipping only)
Mark
