开云体育

I have wondered the same thing. We have a 1989 42 C/B on Cape Cod.

I've got the same tray that you were talking about.? Not sure what the original purpose was for it, but it holds a sponge for quick cleanups or drying out the bilge. As far as getting in the back

#1 May be the little same dust pan that’s at the base of the companionway steps on the 362. Sweep into it.

1. My 34-1 has a small metal tray under the floor board just aft of the mast step. It fits perfect in the opening and I am pretty sure it came with the boat originally. Anyone know its function? 2. I

Topic5c. Re: Handrails leaking? From: Michael Oravetz Date: Sun, 11 May 2025 20:38:14 EDT May I ask where the leaks are/were coming through? That’s the problem, I couldn’t pinpoint where the

No third. PO to me was very good on maintenance that’s why I bought the boat. He was not particularly DIY had one of Maine’s better yards doing the work. My business was construction related

Thank you Tim. I appreciate your time and effort. When you sail to Kenosha, let me buy you a cool beverage. Bob Marthaler Shimako S30 mkII Kenosha, WI

David, during that period Sabre had a one year waitlist. It sometimes went out beyond a year. They were not rushing boats, they were making the market wait for them. Remember our boats are getting

The sheet organizer is subject to a lot more stress My wet core was over a pretty big area. Of course, given time, were the penetration only from the organizer the moisture could travel. -- Dave Short

Bob - This should help you find your model number: -- Tim Dokken 1985 Sabre 32 #59 Bayfield, WI

I am/was getting some water dripping over the stbd settee when it rains. I had rebedded the fixed portlights and the opening portlights were redone a few years ago, so I figured it may be the hand

Must have been the screw penetrations of the deck not sealed/bedded well enough. Mine is a ‘97. Those were the gogo dot com years. Probably a lot of pressure to get boats out the door.

May I ask where the leaks are/were coming through?

Thanks everyone. This chart is a big help. I am still curious what model Mitsubishi engine is the Westerbeke 13. Bob Marthaler Shimako S30 mkII Kenosha, WI

Yes they do leak. Prepurhase survey on my ‘97 362 found wet core all around port handrails so PO paid for replacing core (from the inside) and rebedding both sides . Fastened with self tapping

Hi all, can the handrails cause leaking? I re-bedded both rails with Butyl Tape, and was expecting through bolts to secure them. Instead, they were screwed on. ?Do the screws go all the way through?

That’s a handy chart. I see on the Facet site that the pumps have been upgraded to electronic activation rather than the mechanical breaker points, so they should outlive all of us. Also, the Facet

Hi Carter, Might be a dumb question, but do you have the VHF turned on?

Bob - As mentioned the original pump was made by Facet. ?There is a replacement guide from Facet to make sure you choose the right pump. ?As long as you have the Westerbeke part number and you

I agree that it is weird that position cannot be output from the AIS700, either on N2K or NMEA0183. There may be a technical reason, but more probably it was made by the marketing team! Raymarine do