开云体育

That’s a very interesting product. Never seen or heard of it. We have the Edson one-step as well as the inflatable step. This is much nicer. Thank you. Tony Tony Billera tony.billera@... 206

Roger that Stephen

Welcome Eric. You have good taste in boats. I have see that ladder system up close and personal and think it’s pretty nice. Allison

Keep looking [email protected]> wrote:

“ but then you close the seacock, reattach the hose and off you go.” Better open it again :-) Tony Tony Billera tony.billera@... 206 605 2650 linkedin.com/in/tonybillera Please consider the

Hi Tim et al., We have a strainer and I’m very happy with it. I can’t imagine that there is not a seacock below the hose you’re talking about. When on the several occasions we’ve had no water

Hello, I purchased my Sabre 28 from Connecticutwith a filled CNG tank last year, but the gauge is now showing it is getting low. ?It appears that my Kenyon model 219 stove was converted from propane

I'm about to start life on a 1988 Sabre 38 MK II.? A gem of a boat with the stern boarding ladder.? Yet, that system is not ideal if you want to bring gear, groceries, etc. on board.? I want to get

Our experience as a dealer is that in the event that LiFePo4 batteries get overheated to the point of melting the battery case, they don’t actually catch fire. We had an advertising van with a

Our cabin sole near the mast step and the transition between from the main cabin to the vee birth is getting damaged by water running down the mast.? I know this topic will never end but I wanted to

My mechanic warned me off removing the hose between the filter and the through hull, "unless you really know what you're doing and have spare hose clamps available". ? Since I didn't who what I was

I don't have Li (yet), but I recently completed my Safety at Sea certification, complete with a swim in chilly San Francisco Bay. ?Our instructor, who manages high end racing yachts and expedition

Edward Thanks for sharing your experience, helpful to have this knowledge without the headache. How do you attach your bushing, to the holes in the deck after removing the cover? A photo would be

Tim, McMaster Carr has the tube,1 3/4" OD, 1/8" wall thickness:, 42" length in G10: https://www.mcmaster.com/products/tubing/multipurpose-flame-retardant-garolite-g-10-fr4-tubes/ About $165 + shipping

I am just tuning the rigging on my 402 after the new season launch.? I have rod rigging and a LOOS gauge.? Can anyone give me an idea of the optimal tension that should be attained.? Thanks?

I recall reading somewhere years ago about leaving the raw water intake hose long enough between the thru hull and strainer that the strainer end would be above the static waterline when the hose was

Hi Brian, I just had my 35 year insurance survey and the subject of fire extinguishers only came up as to where they were located and whether they were “in the green”, nothing about a specific

Hi James, I will rephrase. The net effect is to lesson sideslip using the lifting force generated by the symmetric profile centerboard’s angle of attack. I will try using the mostly retracted

Eugene/Maureen: thanks for the feedback. Nice to know the thumping is not unique to my boat and something to be overly concerned about. I will talk to the rigger about it when I get back and see what

Great idea