开云体育

Franz are you talking about a tie color or an anchor light? I miss spoke earlier the one exterior light that is not Marine Beam is the tricolor. It is a Lunasea. It is a very nice design with a bird

Gary, my boat is a 1984 Sabre 32 with start and two house batteries. ?I chose the same set up and opted for the 20 amp controller vs the small unit that comes with the 100W Renogy package. ?I put

I haven't mapped them as you have, but the aft seacocks on my 362 seem to only be for draining the deck drains and the cockpit drains. What kind of situation are you concerned about that would require

Last year I asked our rigger to install the Marine Beam LED deck light and a masthead tricolor/anchor light (with built-in solar switch) - might as well since the original standing rigging and some

Weird, I just tried their website and it is not responding… hmmm. Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax: 510.860.4640 ?

Brian we used Marine Beam for all of our external lights but replaced bulbs with LED bulbs for interior lights. Look on Amazon the year ya lot of these now. Allison Lehman Swiftsure

I agree, this has been a concern of mine that I have no solved. [email protected]> wrote:

Since you mentioned Marine Beam, I’ll chime in on some recent experiences. Several weeks ago I emailed MarineBeam about outfitting a boat with new LED lights, it would have been a substantial

I am replacing the halogen bulbs with LED lamps and the ones I bought for the ceiling puck light fixtures do not fit; they are too long and too thick. These fixtures are smaller than the typical Perko

These are 110w and semi rigid. Tony Tony Billera tony.billera@... 206 605 2650 linkedin.com/in/tonybillera Please consider the environment before printing this email. Thank you.

I have a 40 watt on the stern rail, bought from Arizona wind and solar. Works well for similar purposes. ** James H. Wilson, Jr. Attorney & Counsellor at Law By appt. only: 4860 Cox Road, Suite

We are so happy with our light leaf solar panel. It’s been terrific especially since it comes with brackets that attached to the pushpit. It’s also easily adjusted and when folded down it fits

Hi, I'm the newish owner of a S36 hull #1. I did a map of all seacocks.? There are 2 in the aft lazerettes that are very hard to access. If i climb in, i can't reach them to operate. In an emergency

If you prefer not to install on a dodger or Bimini this product is very good. LightLeaf Solar lightleafsolar.com Tony Tony Billera tony.billera@... 206 605

Hi? ?New sabre 32 owner , Osprey in the Boston area.? Boat will be on a mooring and so? I need solar power to trickle charge the 2 12 volt batteries and to provide power to bilge pumps when

Hi Rob, Yes, I have had annoying slow leaks in the threads, which after much head scratching I traced to the taper vs straight incompatibility. Pipe compound fixed it. The Shur-flo adapters should

Single lever faucets from plumbing supply or big box are a great way to go. Less $$ and better quality than “marine” faucets. Single Lever use less water. Less time water running and adjusting

Hi Foster, yes, after I compared the price of the new model and the service kit, counted my time toward another project, and factored the likely chance of lasting and durable success, I realized it's

The threads on sink faucets are 1/2" straight, not tapered. Most single piece hose barb adapters are 1/2 " NPT, i.e. tapered. They will screw together but Teflon tape will not prevent the threads from

From my experience trying to rebuild my older foot pumps I would just replace it.? I bought rebuilt kits for 2 of them and do to the age of the plastic (being brittle) they housings broke almost