开云体育

Thank you all very much.? Gus

5.3 gal ? That doesn’t seem to be much hot water. Ours is 12 gal on the Delphia 40. Tony Tony Billera tony.billera@... 206 605 2650 linkedin.com/in/tonybillera Please consider the environment

Tim I have some experience with Marrs. Be prepared for lots of delays and a bit of confusion on their part. They are very difficult to deal with as far schedules go. You will need drawings in CAD, and

so happens I have one in my back yard :-) I will check tomorrow in daylight. Tim R 38MKII in refit (with a wing keel :-))

Hi Gus, Dims would help. I am looking for an assym.? I may have found one but I am looking for a somewhat better fit. Tim R 38MKII in refit

John, I agree with Len.? I am looking to do the same with my 38.? I have been in contact with MARS keels to do this work.? They manufactured the lead keels. Right now they are unable to do the work

A few years back I looked into modifying a S36 keel to make it shorter. I think Sabre used a foundry in Connecticut or Rhode Island. Glen would know. Dave Second Star S362 #113 Fair Haven, NY/Lake

We got lucky, the velcro we ran into is old stuff and we’re able to peel away without too much difficulty. Leaving in the morning. Dave Second Star S362 #113 Fair Haven, NY/Lake Ontario

John one more thing. Mars Metals I believe built our Sabre keels. Give them a call too. Here’s a link to their website. https://marsmetal.com/ Len Bertaux

While I’m not personally familiar with yards in NY and CT others on this list are, I’m sure. Carter would you like to chime in? I’m not sure why you think the bolts need replacing but the

Thanks Jim, we have decided to change to the Isotemp 20 l (5.3 gal) heater for the replacement. It is about half the price of the Raritan and includes a drain and tempering valve. It has a stainless

Ossining ny [email protected]> wrote:

Lots of yards. Where’s your boat? Len Bertaux

A pair of well known Sabre sailors from the Chesapeake did the same stop, then returned to Vero permanently. It’s a nice place, especially now, but you have to have your eyes open about Florida

Who in the Northeast is qualified to replace the keel bolts if I remove and replace the keel myself and transport it to the recommended facility? Thanks John Sheehan Sabre 34 Targa #373

He is still working and not retiring yet. I just spoke with him yesterday. Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax: 510.860.4640 ?

Defender purged the old database a while back. Dave

Hi Jim, Yes the original Raritan 12 gallon unit. When winterizing, I pull both cold and hot hoses off and join them together. Then I have to disassemble the bottom piping because that check valve down

I bought six, for my 362, in 2021 from Fisheries Supply

Dan I got the part number from Defender. Jim Kerney had purchased them, and I had to call up Defender and have them go through HIS orders to find the number. I doubt I could do that trick with the new