开云体育

Yes they do leak. Prepurhase survey on my ‘97 362 found wet core all around port handrails so PO paid for replacing core (from the inside) and rebedding both sides . Fastened with self tapping

Hi all, can the handrails cause leaking? I re-bedded both rails with Butyl Tape, and was expecting through bolts to secure them. Instead, they were screwed on. ?Do the screws go all the way through?

That’s a handy chart. I see on the Facet site that the pumps have been upgraded to electronic activation rather than the mechanical breaker points, so they should outlive all of us. Also, the Facet

Hi Carter, Might be a dumb question, but do you have the VHF turned on?

Bob - As mentioned the original pump was made by Facet. ?There is a replacement guide from Facet to make sure you choose the right pump. ?As long as you have the Westerbeke part number and you

I agree that it is weird that position cannot be output from the AIS700, either on N2K or NMEA0183. There may be a technical reason, but more probably it was made by the marketing team! Raymarine do

The only thing which comes to mind is to check the settings to select the new map card slot. I recall you can see both slots in the menu. My mfd is a zeus2. Len Bertaux Walkabout S38mkii Prides

I just inserted a new Navionics micro Sim card into my Zeus touch screen MFD and all I am seeing are the shoreline course detail-? no normal navionics data.? All other Navionics cards work fine.?

Ideas for Sailing on a Kayak? A small parachute kite, with a kayak with a rudder and flat bladed paddles( used as Lee boards) can be a fun sail. cheers!! -- Eugene & Maureen ‘Timeout’ 34-2 1987

Bob If you have cylindrical pump with a bottom filter, it’s a Facet pump, available from many discount auto parts sites at a fraction of the Westerbeke price. It’s not a Mitsubishi part. You will

Thanks Everyone. It complained but finally started.

Please check your manual for the sizes (yes, there are two at a minimum) if you have rod so you have the correct gauge. For Sabre 38 MK2 the Loos model is RT-10. ________________________________ Sent:

On the subject of lift pumps, I was thinking of getting a spare for my 1984 W13. I understand that our engines are Mitsubishi painted Westerbeke red. Does anyone know what model engine my W13 is? Also

It does appear that there are two different gauges for rod or wire. And there are instructions toons on the web to make your own gauge. Tension Gauges - Loos & Co., Inc. loosco.com TonyTony Billera

There are different sizes of Loos gauges, be sure to get the one for your size of rigging. I also believe there is a different one for rod vs wire. https://loosco.com/tension-gauges/? Allison Lehman

They are different for wire and Rod rigging. Stephanie Arista, S36 #67, Lake Ontario Shburgess1207@... -- Stephanie Moderator Sabre 36, #67 Formerly Sabre 28-2, #289 Wilson Harbor, NY Lake

Yes it is made for rod rigging.? Mike

Does that Loos tension gauge work on rod rigging? Thanks, Michael Wind Walker S402-097

That is where my kayaks or bikes go when crossing the lake. I have seen U shaped holders outside the lifelines. I see these are at Amazon and west Marine. https://a.co/d/9AabVNs Stephanie Arista, S36

I bought our 42 with one of these Scanmar ladders already in place. I also have the Edson step that I have had for years and kept ti with me as we moved boats... My preference is the step vs the