Guys, the point should be what suits your needs best then how much does it cost and how can you whittle that $ down.
Allison LehmanSwiftsure Yachtsallison@...Cell: 510.912.5800Fax: 510.860.4640
toggle quoted message
Show quoted text
On May 10, 2025, at 9:00?AM, Jeff Bartlett via groups.io <Jhbartlett@...> wrote:
Ok,
I didn¡¯t go that far.
Functionally they are equivalent. ?If you have the time, tools, and talent, the wood step is likely more satisfying to have and use.
Being unretired, I still factor in time and wages, which makes cost more equal for me.
But even giving it away, Dave would be out at most $20 and his free time. Shipping and tax on the fancy one is likely more than that, so unless you can magically sell a used one for more than you were charged for it new, you are further behind.
On May 10, 2025, at 11:05?AM, Tony Billera via groups.io <tony.billera@...> wrote:
? Cheaper but not anywhere near equivalent. The Edson will last and perform as new for a lifetime. And then one can sell it.?
The hooks themselves are very high quality and about $20 each.?
Please consider the environment before printing this email. Thank you.
On May 10, 2025, at 7:05?AM, David Lochner via groups.io <davelochner@...> wrote:
?The $20 included wood and line. I had some left over varnish. Took may be an hour to make it not including drying time between varnish coats. As for time, I¡±m at that stage of life where my income only depends on me breathing, aka, retirement.
Even if I valued my time at $100/hour, it would still be cheaper.
Dave
Second Star
S362 #113
Fair Haven, NY/Lake Ontario
On May 10, 2025, at 9:50?AM, Jeff Bartlett via groups.io <Jhbartlett@...> wrote:
It is only $20 if you have the scrap wood, rope, vinyl strip, tools, varnish equipment and a skilled worker who values their time at $0/hour.
Dave wrote:
Yikes! ?$409 for a step?
I have a boarding step made from a 6¡± x 16¡± piece of oak suspended by 5/16¡± line. I added a piece of vinyl weather stripping on the edge that sits against the hull and rounded over the outer edge and varnished. Total cost about $20. Works well and easy to stow
between the stanchion and the toe rail.
Jeff
--
Jeff B
1988 Sabre 34-2, 347
S/V Northwood
Deale, MD
--
Jeff B
1988 Sabre 34-2, 347
S/V Northwood
Deale, MD
--
Allison
S426 Kingfisher
SF Bay/Pacifc Northwest