开云体育

Usually, this is due to a combination of either tight squelch, narrow instead of wide FM on the receiver, or TX A/DSP level too high. What radios have you tried? In all cases like that which I've

I am not sure whether to call this clipping or dropped carrier.? The symptoms are dropped carrier on a predictable frequency, usually between words on audio receipt. I Tried various suggestions

Ham innovation at work. Nice hack! We have been busy at Kits for Hams also.? Check out our new SHARI PiZero at www.kitsforhams.com ( http://www.kitsforhams.com ) We have SHARI PiZero kits available

Yes :) I discovered that soon right after I posted the initial question.? Since the original post have to wait for admin approval,? ?I could not edit the post. But it is all good now. My SHARI

You can edit the script. # configure the serial connections (the parameters differs on the device # you are connecting to). ttyUSB0 is used for SHARI PiXX and SA818 # ttyAMA0 is used for SHARI PiHat.

Just a bit of portable fun. Cheers. Ron VK3ANT https://youtu.be/3oXlM1rWvTQ

Answering my own question.? Soon after I just changed the orders of device list in line #172 Changed the order in line 172 from device_list = ['/dev/ttyUSB0', '/dev/ttyS0', '/dev/ttyAMA0'] to

Just edit the script and change the order that it searches for devices.

Hmay be this is not right place to ask How to obtain the IRLP No registration link Pls send email

Generally no, unless the reflector owner has provided their own bridge to AllStar (for example, I have two channels on my IRLP reflector permanently linked to AllStar). -- 73 de Tony VK3JED/VK3IRL

Is there a way to access IRLP REF example 9251 from a allstar node?

Larry, Thanks for the information. I'll check it out. 72/3 Jason Wv3V

Hi there, No the sticker was placed on the bottom of the Shari node and I didn't realize it until after I took the pics. I since removed and replaced it on the proper side. At first I was like. "Why

Folks, No big issue but I would like to run SA818-prog and have it looking at ttyAMA0 instead of ttyUSB0.? I do have both,? ttyAMA0 is PiHAT and ttyUSB0 is my ThumbDV. I guess SA818-prog is default

Here is the measurement we made.

The Aursinc SHARI is a Chinese clone of the genuine SHARI by N8AR and is not supported on this group.? Please contact the manufacturer for support. Also, you may want to contact Ebay about returning

Hello all, I have a Shari that I got off ebay , actually it’s a very nice little unit I think, but all is well with it , but I get a whisting pitch in the Tx audio when I am Connect to a parrot or a

Mine is approaching 4 years old. Working great. I've also put together 6 others mostly for new/blind hams. If you're looking for an active node, withabout 5 nets weekly? try NODE 506310 to 5... I use

Thanks for telling us about your SHARI build.? Excellent soldering! I am curious about your placment of the label.? It appears to be on the bottom of the case and rotated 180 degrees.? Are you

Greetings All, This past few weeks, the local hams here in Las Vegas, NV. have been discussing the mode All Star and of course I have become interested in it. So, what does one do? Buy a kit and build