开云体育

Is there a program I can use to adjust the receive attenuation of the radio? -- L. David McLennon VO1LM, VO1LDM 3.740, 146.940 Director, SONRA 54 Hawker Crescent St. John's, NL A1E 3W4 709-682-8752 -

Is your hotspot close to your node so you are receiving a strong WiFi signal.? The all metal Unistorm case will attenute the WiFI signal some.? It should be fine if you are close to your hotspot

Just on WiFi. It has been pointed out that my phone company may be using double NAT. But I have been able to use the phone hotspot on other Shari nodes without any problems. I've got an original Pi3V

Do these symptoms occur while you are using a wired Ethernet connection or just on WiFi?

Have you tried a good, stout 2.5-3A power supply? -Pres W2PW

I am getting this error. [Nov 28 16:36:32] ERROR[370]: app_rpt.c:12333 rpt: No link messages from [502690] in 48 seconds -- One way audio?? Forcing reconnect. I've been fighting with this for a few

Excellent. I am not a fan of the arch linux part of hamvoip, but the rest makes it an easy solution. Especially with the DAHDI drivers being a pain to get compiled on a pi. -Michael Sent: Friday,

Knowing where in the boot process it reboots would be helpful. Can you record the screen on a cellphone and then transcribe the last few lines before reboot OR share a link to the video. Ken, N2VIP

The display shows the typical linux boot sequence. If J1 is connected then the Pi reboots constantly part way through that listing.

Hi Michael, Thanks for the reply.? You are correct.? There were quite a few corrupted files in the python directories.? Before I attempted to re-program the SA818, I created a backup of the

There is no ./ in front of SA818-prog Brett.

It should be in the path. Just type SA<tab> If that fails then your python is broken and needs mending. The python version on hamvoip should be 3.5.1 -Michael Sent: Thursday, November 24, 2022 12:12

I am attempting to change the frequency of my SHARI PI3B+.? ?My steps to get the subject error: 1) Performed an update using item 1 of the admin menu. 2) changed to the /usr/local/sbin directory 3)

Hello Barry, This sounds like a problem with hairpin NAT. Some of the components are loading from your dynamic DNS hostname, which is returning your public IP. But your router is not forwarding those

Yes, I understand it now, it works fine where ever I have been told, and now even my cellphone off my network some reason it is just wrong on my main PC. Different browsers nothing just shows, WAITING

Ya it just don't display right here on home network, but out off my local Lan , it's fine.. no biggy just weird Barry

Plug an HDMI monitor into your Pi3 and tell us what it displays when it tries to boot.

Got it

I have a Pi-3 based PiHatU. ?If I leave J1 disconnected, the Pi boots normally. I’ve check the wiring to the Pi test points… no shorts, no solder bridges & the wire colors appear connected to the

Thanks for the responses. Stupid me had one of the USB ports on the Shari plugged in with an extension cord to keep it operational so once the programming port was re-engaged all is well. SMH -- Jack