开云体育

That is interesting Brad. I did not know that would work. I am able to log into my supermon remotely but the connected node list says waiting. Any idea why that would be?

Go to bash shell and look at /srv/http. You should have a folder called supermon. You can also use allmon2 - it’s also preinstalled. You just need to configure it first.

if you are running hamvoip then you just need your nodenumber.ip.hamvoip.org/supermon? ex: Mine would be 457430.ip.hamvoip.org/supermon. when running local it should be? yourlocalIP/supermon ex:

By default, Supermon should be on port 80.? Try [mylocalIP]/supermon/ and see if that gets you anywhere.

I'm at a complete loss... Summary: Fresh install of HamVoIP (because my SD card took a dump; first install in several years but it was kept up to date). All working fine, no problems. Next, I

Problem I found was with WIFI wireless connection using a hot spot caused disconnects. Once I did ethernet connect rj45 to raspberry pi all drop out disappeared. Plus hotspot does not allow for dual

I had my Shari PiHatU working. I went to set up a WIFI connection and now I have no green light. When I go in to test he audio settings it tells me Device USB Currently Not Active. What have I done

So my plan is to get a VHF version to take mobile.? ?I will resurrect a nighthawk MR1100 hotspot that I have with a Ting mobile sim card.?It is a good device.? I will be able to have a ethernet

Add 220mhz to the wanted Shari chip also.? ?Until then , it's other methods requiredSent from my Galaxy

That's a 12 year old product announcement for a device designed to cover 800 MHz to 2.7 GHz, that is no where near 4/6m, and as I read the description, it's for a receiver, not a transceiver. Ken,

I suggested DINAH on Tuesday, it's apparently not the clean, cable-free solution Daz was hoping for. He wants to a replacement module for the SA818 that covers 4/6m bands. Nice-RF, the makers of the

Steve N8AR, Developer of the Shari and other complimentary devices from his small company KitsForHams ( https://kitsforhams.com ) offered a great solution. DINAH is a plug and play device to interface

My older '5R has the letters on the top row as ACBD and my newer one is in the proper ABCD order.

Check your radio manual, there should be keys that map to the letters, the manual should explain how. For example, on a Baofeng U-verse-5r, the top row of keys (menu, up arrow, down arrow, and exit)

I've never understood how to get letters in my dtmf string from my HT. Sent from my Samsung Galaxy XCover FieldPro, an AT&T 4G LTE smartphone Get Outlook for Android<https://aka.ms/AAb9ysg>

Hi kennet I take my node always Mobil by using cell phone battery power bank because using the cigarette lighter is getting my alternator noise I run my about 24 hours before needs to be recharge

Hi ke

About a year and a half ago I took it to a hamfest in Joplin Missouri. Operated off my cellphone hot spot and? a cellphone type battery bank.? I participated in a Saturday morning net and kept in

I usually keep mine at home and use DVswitch Moible to connect. But if I'm in a group setting out of town, like SeaPac. I'll bring it and a openstub Jpole. So we all can use our HT's

Ken lots of people do, they work great,? make sure you setup *b1 to shut down your node from your radio when you want to do a shutdown, also if you want the node to stay connected to some node make