开云体育

OK, so HAMVOIP runs on ARCH LINUX this website will be your best resource for a while https://wiki.archlinux.org/ Ping is just ping ==> in BASH type ping www.google.com (screenshot below). If you

Thanks Darrell. I used the wifi setup function that’s included on the main screen. It connected to the router and I was able SSH into it but it wouldn’t register with the Allstar server until I

If you are using the HAMVOIP version of allstar the wifi drivers are built in. All you need to do is boot from the SD card and answer all the questions. You need a monitor, keyboard and mouse at

Thanks.? Things are starting to make a little more sense now. I've finally got Allstar, Echolink and the COS LED working.? My next project is to get it working wirelessly. From what I've been

You enter a different code for CDCSS than you do for CTCSS when you program SHARI. The following is copied (and slightly corrected for English) from the SA-818 Programming Manual which can be

I would much prefer this method of PL encoding. How is it implemented on a Shari node?

Allstar obtains the correct time from the internet so the only reason I know that the clock could be wrong is if you are not connected to the internet.? Are you using a wired connection? To get to

How do I get to a prompt to edit files? I have to figure out how to get the tones to decode and how to set the clock somehow. It won't decode DTMF 3 from any of my radios so I haven't been able to

I agree that the SHARI setup procedure should not say " 16 GB required" and will change that.? I found a recent recommendation dated March 28, 2020 ?by Doug, WA3DSP for SD cards? in the HamVOIP

I propose a change to the document 'SHARI Allstar Node Setup and Configuration Guide'.? on page 2 the required hardware list suggests a SD Card 16G or larger.? this should be changed to 4G required

All of Allstar is messed up right now. The nodes are connecting and if you have a secondary Hamvoip registration then node information os somewhat displaying. NNX nodes are not even listed are now. I

No supply issues as far as SHARI is concerned.? Both the Pi3 and the Pi4 supply 1.2 amps max on the USB ports.? SHARI only needs about 500 mA in TX mode.

Allstar database is all messed up not sure why.. it started last night John WX5OU wx5ou@... John@... No trees were harmed in the creation of this message, but a large number of electrons

Looks like an AllstarLink issue.? The last node currently shown under Node Status and Maps is 50876.Shows up fine in the Allstar Link Node List. ---------------------- AllStar Link Node List

What does it mean if the SHARI web page cannot find status information about my node?? The node itself seems to be connecting and otherwise functioning properly? Thanks & 73, Ralph AA8RK

Hi Darrell, Are there supply issues with either the PI3 or PI4? What are the advantages of the Pi4 over the Pi3? Thanks, Ralph AA8RK

Electrically, at the USB interface, the Pi3 and? the Pi4 are identical. The only difference is the location of the USB ports to accommodate the new location of the USB ports in the Pi4.? If you plug

That idea has a lot of merit. :-)

My understanding is the SHARI's are the same. The only difference is the USB ports are flipped so the SHARI is right side up for the PI you are using without blocking the Ethernet port. If it was me,

I actually didn't order anything. I know that sounds weird. I wrote about ordering one back in February, Shari replied to my message, and I either didn't receive it or accidentally deleted it. I wrote