开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. SHARI
  2. Messages
Expanded Topics Messages Polls
Date
Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

My problem has been 100% resolved, thanks to Steve and others.? I was SO certain that my bench 5V supply was healthy that I never checked the output with a simple voltmeter when I started having this trouble.? What I found was the regulator module had failed, and the voltage would sag to below 3.0 volts when the PI would boot.? GADS.? Fixed that, and the SHARI is now up and running !?

Sincere THANKS go out to STEVE, who connected with me directly on a Zoom session to assist, and he got me pointed in the right direction.

Gary / WB8ZGV
Re: Severe hum that was not there before - SOLVED

 

Please elaborate on what you mean by "receive".? Is this the audio that you transmit to the node that others hear (RX of the SA818 in the node) or audio that you hear listening to your node (RX of the radio you are using to communicate with the node)?
Re: Power outage changed my node IP address

 

开云体育

"Ken - N2VIP's answer is spot-on"

It would be helpful if you would quote what that is. Otherwise, what is this telling anyone without having to go back trying to find it?

Mick - W7CAT


----- Original Message -----
From: "David - EI7KN"
To: [email protected]
Sent: Saturday, December 10, 2022 03:29:54 AM
Subject: Re: [SHARI] Power outage changed my node IP address

> Ken - N2VIP's answer is spot-on.
>
> This is the easiest method of ensuring that anything that you don't want changing its IP address, will keep its IP address, no matter what reboots in whatever order.
>
> 73's de David - EI7KN
>
>
>
>
>
>
--

Re: Power outage changed my node IP address

 

开云体育

Appreciate the guidance!

?

Merry Chrstmas,

?

Bob Callan

K9RC

?

From: [email protected] <[email protected]> On Behalf Of Ken N2VIP
Sent: Friday, December 9, 2022 8:35 PM
To: [email protected]
Subject: Re: [SHARI] Power outage changed my node IP address

?

Yes, you should set the node to DHCP and then go into your router and set a reservation for your SHARI, then ensure your port forwarding points to the current IP address. Then, anytime that SHARI turns on. It will retrieve the same IP address, and the reservation will be documented in your routers DHCP server.

?

Ken, N2VIP



On Dec 9, 2022, at 20:05, Bob K9RC <rec@...> wrote:

?We had a power outage and the node acquired a new IP address. I have updated the IP in rpt.conf, but still no joy. Would appreciate any guidance.

Should I give the node a? static address?
--
Bob, K9RC


--
Bob, K9RC
Severe hum that was not there before - SOLVED

 

Hi, can anyone provide some help on a new issue. My Shari Pi3U has been working terrific up until yesterday when I started getting a severe hum on receive. Tried moving the node around the house and still the same. I have the ferrites on the power supply and it is a raspberry supply. Like I said it was working great up until yesterday. Anyone one else have this issue and what was the fix?

73?

Scott VA4SMC
Re: Power outage changed my node IP address

 

Ken - N2VIP's answer is spot-on.

This is the easiest method of ensuring that anything that you don't want changing its IP address, will keep its IP address, no matter what reboots in whatever order.


73's de David - EI7KN
Re: Power outage changed my node IP address

 

开云体育

Yes, you should set the node to DHCP and then go into your router and set a reservation for your SHARI, then ensure your port forwarding points to the current IP address. Then, anytime that SHARI turns on. It will retrieve the same IP address, and the reservation will be documented in your routers DHCP server.

Ken, N2VIP

On Dec 9, 2022, at 20:05, Bob K9RC <rec@...> wrote:

?We had a power outage and the node acquired a new IP address. I have updated the IP in rpt.conf, but still no joy. Would appreciate any guidance.

Should I give the node a? static address?
--
Bob, K9RC

Re: Power outage changed my node IP address

 

开云体育

Internal

K9RC

On Dec 9, 2022, at 8:22 PM, ve9dwf@... wrote:

?Internal address as in 192.168.*.* ?? ? Or external public .? ?

--
Bob, K9RC
Re: Power outage changed my node IP address

 

More info on your setup would be helpful.

?

You don't need to worry about changing the IP in rpt.conf for a single node, it should be pointed to the loopback.

If you have multiple, then you should make static or simply reserve the IP in the router.

?

If you mean the public IP, you should setup a DDNS name for it.? Several free options.
Re: Power outage changed my node IP address

 

Internal address as in 192.168.*.* ?? ? Or external public .? ?
Power outage changed my node IP address

 

We had a power outage and the node acquired a new IP address. I have updated the IP in rpt.conf, but still no joy. Would appreciate any guidance.

Should I give the node a? static address?
--
Bob, K9RC
Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

Sorry it took me a little while to get this accomplished.? Here's a quick video, hope it's helpful.

Gary / WB8ZGV

SHARI_PiHatU_repeated_reboot_video.zip
SHARI_PiHatU_repeated_reboot_video.zip

Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

开云体育

Did that?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Champion
Sent: Thursday, December 8, 2022 2:46 PM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Or just reseat the sdcard.? Forgot that easy step.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Thursday, December 8, 2022 10:21 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Ok ??a good thought?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Champion
Sent: Thursday, December 8, 2022 10:41 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Do you have another SDcard you can use?? Build a new one and test.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Wednesday, December 7, 2022 3:02 PM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

It stays powered up?? the lights stay on? Ill read and watch voltage

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gary
Sent: Wednesday, November 30, 2022 6:20 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV

?

Virus-free.
Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

开云体育

Or just reseat the sdcard.? Forgot that easy step.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Thursday, December 8, 2022 10:21 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Ok ??a good thought?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Champion
Sent: Thursday, December 8, 2022 10:41 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Do you have another SDcard you can use?? Build a new one and test.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Wednesday, December 7, 2022 3:02 PM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

It stays powered up?? the lights stay on? Ill read and watch voltage

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gary
Sent: Wednesday, November 30, 2022 6:20 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV

?

Virus-free.

Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

开云体育

Ok ??a good thought?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Champion
Sent: Thursday, December 8, 2022 10:41 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Do you have another SDcard you can use?? Build a new one and test.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Wednesday, December 7, 2022 3:02 PM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

It stays powered up?? the lights stay on? Ill read and watch voltage

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gary
Sent: Wednesday, November 30, 2022 6:20 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV

?

Virus-free.
Re: won't start

 

Can you SSH into it?

Can you see the node at allstarlink.org?? (under Lists-Stats click on Active node list and in the FILTER box type in your Call... ?
You call should be green?

At Kit's for hams there is a set up procedure..Read it over...

Larry W8LM
Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

开云体育

Do you have another SDcard you can use?? Build a new one and test.

?

-Michael

?

From: [email protected] <[email protected]> On Behalf Of Richard Lenker KB3YRC
Sent: Wednesday, December 7, 2022 3:02 PM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

It stays powered up?? the lights stay on? Ill read and watch voltage

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gary
Sent: Wednesday, November 30, 2022 6:20 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV

?

Virus-free.

Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

开云体育

It stays powered up?? the lights stay on? Ill read and watch voltage

?

From: [email protected] [mailto:[email protected]] On Behalf Of Gary
Sent: Wednesday, November 30, 2022 6:20 AM
To: [email protected]
Subject: Re: [SHARI] Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

?

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV


Virus-free.
Re: Pi3 will not boot when SHARI PiHatU GPIO connector is plugged in

 

Yes....tried a bench power supply that's good for 10A...unfortunately, same result.? I'll try to capture the rapidly-scrolling display on my cell and see if I can discover what the last few lines show...

Gary
WB8ZGV
won't start

 

开云体育

I have an All-star node that was built for me.??? Its been off line for 6-8 months? ?How do I get it restarted.

?

It shows on my network for all but 1 minute then locks up. I have a red and green lite on the lower right and a green cor lit up and to the left.

No flashing or blinking.

KB3YRC

Richard


Virus-free.
1461 - 1480 of 4140