¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. SHARI
  2. Messages
Expanded Topics Messages Polls
Date
Re: Strange behavior connecting to the echo server 55553

 

Sorry, I guess that is the one you tried. It works for me if that's any help.

On Tue, Dec 3, 2024 at 11:08?PM Don Hiatt <donhiatt@...> wrote:
Try the Parrot+ server 55553

On Tue, Dec 3, 2024 at 10:52?PM Derek Velez KK4QGD via <KK4QGD=[email protected]> wrote:
Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect my node to 55553 as recommended in the SHARI instructions to test the sound quality and as soon as the last DTMF tone is sent and the PTT is released I get the hung high pitch sound that will not stop until I unplug the SHARI and plug it in again. This seems to repeat every time. I noticed when I connect to the echolink parrot server I do not get the high pitch and everything works just fine. It's just the 55553 one that does that. I don't know if it's the server having problems or either my radio or HT. Has anyone encountered this?
Re: Strange behavior connecting to the echo server 55553

 

Try the Parrot+ server 55553


On Tue, Dec 3, 2024 at 10:52?PM Derek Velez KK4QGD via <KK4QGD=[email protected]> wrote:
Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect my node to 55553 as recommended in the SHARI instructions to test the sound quality and as soon as the last DTMF tone is sent and the PTT is released I get the hung high pitch sound that will not stop until I unplug the SHARI and plug it in again. This seems to repeat every time. I noticed when I connect to the echolink parrot server I do not get the high pitch and everything works just fine. It's just the 55553 one that does that. I don't know if it's the server having problems or either my radio or HT. Has anyone encountered this?
Re: Strange behavior connecting to the echo server 55553

 

¿ªÔÆÌåÓý

I just tried connecting and that sound you hear is a 1 kHz tone.

?

I¡¯ll let N2DYI know.

?
Re: Strange behavior connecting to the echo server 55553

 

¿ªÔÆÌåÓý

?

From: [email protected] <[email protected]> On Behalf Of Derek Velez KK4QGD via groups.io

?

Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect my node to 55553 as recommended in the SHARI instructions to test the sound quality and as soon as the last DTMF tone is sent and the PTT is released I get the hung high pitch sound that will not stop until I unplug the SHARI and plug it in again. This seems to repeat every time. I noticed when I connect to the echolink parrot server I do not get the high pitch and everything works just fine. It's just the 55553 one that does that. I don't know if it's the server having problems or either my radio or HT. Has anyone encountered this?

?

?

That¡¯s a 1 kHz test tone coming from that particular node. So don¡¯t worry, your equipment is fine.

?

I just texted Patrick about It so hopefully he will take care of it soon¡­ unless he¡¯s sleeping.
Strange behavior connecting to the echo server 55553

 

Hi I was testing a new HT and antenna set up on SHARI and I wanted to see how well it worked. I tried to connect my node to 55553 as recommended in the SHARI instructions to test the sound quality and as soon as the last DTMF tone is sent and the PTT is released I get the hung high pitch sound that will not stop until I unplug the SHARI and plug it in again. This seems to repeat every time. I noticed when I connect to the echolink parrot server I do not get the high pitch and everything works just fine. It's just the 55553 one that does that. I don't know if it's the server having problems or either my radio or HT. Has anyone encountered this?
Re: Shari PI3U/V 3d case

 

Where are you taking orders?
73 KO4NCC Jeff
Re: adding a work wifi SSD and password

 

Without sounding dumb how do I tell, the model I got was the pi3u? but beyond that I don't know. I've had the setup for about 4 years
Re: Shari PI3U/V 3d case

 

Hi Brett.
?
Great looking case.? Do you have more pics of the inside and how everything mounts up ?
?
-Jeff
?
Re: New pi4 SHARI pihat

 

Here is what I found.? When you first start the ASL3 installation. it automatically installs updates but does not reboot.? Without the reboot, you get the connection failed message.? So do a reboot as soon as you check to ensure there are no more updates.
?
The above is for the Pi4.? For the Pi5, you have to edit /boot/firmware/config.txt.
?
Please look at this document for more information.
?
Re: New pi4 SHARI pihat

 

¿ªÔÆÌåÓý

And as soon as I hit send I decided to remove the console= again and it works.? Sigh.

?

-Michael

?

From: [email protected] [mailto:[email protected]] On Behalf Of Michael Champion
Sent: Sunday, December 1, 2024 4:46 PM
To: [email protected]
Subject: [SHARI] New pi4 SHARI pihat

?

I am trying to program the frequency on a SHARI pihat.

?

It¡¯s a pi4

I loaded ASL3

Tried without and then added the console=serial0,115200 to the end of cmdline.txt

Verified bt was disabled in config.txt

?

When the sa818 script runs I get Connection error only on the radio function.? It appears to work fine for the volume and filter functions.

?

I have built 10 of these so far but this one wants to fight me.

?

-Michael N5ZR

?
New pi4 SHARI pihat

 

¿ªÔÆÌåÓý

I am trying to program the frequency on a SHARI pihat.

?

It¡¯s a pi4

I loaded ASL3

Tried without and then added the console=serial0,115200 to the end of cmdline.txt

Verified bt was disabled in config.txt

?

When the sa818 script runs I get Connection error only on the radio function.? It appears to work fine for the volume and filter functions.

?

I have built 10 of these so far but this one wants to fight me.

?

-Michael N5ZR

?
Re: Trouble connecting to ALS3 node

 

¿ªÔÆÌåÓý

I used the repeaterbook app and checked the frequency I wanted to use
and 5 MHz up and down within 25 miles of my site. All good here.

On 2024-11-26 09:39, Jon Spreha via groups.io wrote:

?
> It's worth mentioning that 446.1 mHz is indeed an active repeater input in some places.
?
As a new ham, myself.... other than listening to your ALSN frequency with no PL tone and checking repeaterbook in your area, is there any other thing we should do to stay out of the "hardway" column ?
?
I did notice when I setup my hotspot sans a PL tone that I was getting some stray signals into my node, not full conversations just some noise.? I tossed a PL tone on it and I have yet to hear any noise.? ? ?This just reminded me to remove the RX tone on my HT to make sure I am not hearing anything.?

Jon N7JMS
Re: Trouble connecting to ALS3 node

 

?
> It's worth mentioning that 446.1 mHz is indeed an active repeater input in some places.
?
As a new ham, myself.... other than listening to your ALSN frequency with no PL tone and checking repeaterbook in your area, is there any other thing we should do to stay out of the "hardway" column ?
?
I did notice when I setup my hotspot sans a PL tone that I was getting some stray signals into my node, not full conversations just some noise.? I tossed a PL tone on it and I have yet to hear any noise.? ? ?This just reminded me to remove the RX tone on my HT to make sure I am not hearing anything.?

Jon N7JMS
Re: Trouble connecting to ALS3 node

 

¿ªÔÆÌåÓý

It's worth mentioning that 446.1 mHz is indeed an active repeater input in some places.

Someone in Brooklyn who had a SHARI and didn't change it's frequency found that out the hard way once.


On 11/25/2024 12:40 AM, N8AR via groups.io wrote:

My Yaesu DR-1X automatically shifts the TX frequency by 600 kHz at 446.100 MHz until I change it.? Check and make sure yours is set to simplex.? ?CONFIG>RPT SHIFT>SIMPLEX
Re: Trouble connecting to ALS3 node

 

Well, that did the trick? Thanks for troubleshooting, greatly appreciated!?

73


On Mon, Nov 25, 2024 at 12:41?AM N8AR via <n8ar73=[email protected]> wrote:
My Yaesu DR-1X automatically shifts the TX frequency by 600 kHz at 446.100 MHz until I change it.? Check and make sure yours is set to simplex.? ?CONFIG>RPT SHIFT>SIMPLEX
Re: Trouble connecting to ALS3 node

 

My Yaesu DR-1X automatically shifts the TX frequency by 600 kHz at 446.100 MHz until I change it.? Check and make sure yours is set to simplex.? ?CONFIG>RPT SHIFT>SIMPLEX
Re: Trouble connecting to ALS3 node

 

No change (photo) before/during PPT

Thanks



On Sun, Nov 24, 2024 at 10:58?PM N8AR via <n8ar73=[email protected]> wrote:
In simpleusb menu Item V do COS and PTT change when you key your HT?

IMG_1039.jpeg

Re: Trouble connecting to ALS3 node

 

In simpleusb menu Item V do COS and PTT change when you key your HT?
Re: Trouble connecting to ALS3 node

 

Yaesu HT w/ CTCSS - Tone enabled
Duplex type - 1 half duplex hotspot

thanks

On Sun, Nov 24, 2024 at 9:02?PM N8AR via <n8ar73=[email protected]> wrote:
The settings look fine.
?
Are you sure you have CTTS enabled on your HT?
?
What mode did you select in ASL3 setup?? It needs to be duplex=1 in rpt.conf
Re: Trouble connecting to ALS3 node

 

The settings look fine.
?
Are you sure you have CTTS enabled on your HT?
?
What mode did you select in ASL3 setup?? It needs to be duplex=1 in rpt.conf
221 - 240 of 4138