Random keyups with PiHatU
I assembled my PiHatU with the Unistorm case and set up a frequency and CTCSS tone. The unit would randomly key up as if it received a signal, but no signal was sent, It even did this if disconnected from the network. I changed the frequency and the tone and it still happened. I then changed from using CTCSS to DPL and problem stopped.? I do have another PiHatU (original case) and it does not have this issue. Anyone else experience this or know what is going on?
|
WiFi issue on SHARI PiHatU (Unistorm)
After I put together my PiHatU and tried to connect it to my Wifi (2.4G), it would either not connect at all or connect for a short time then disconnect. When I switched to a 5G connection (same access point), it works fine. I am wondering if the all metal Unistorm case may be causing issues on 2.4G. Anyone else having this issue? Thanks.
?
|
In setting up the Paul I¡¯m unable to successfully trigger COS in the simple usb tune utility. ?I can probe the pinout and watch it trigger however this is never detected by the software. ?Any suggestions? ?
?
|
Re: Fails Asterisk touch-tone test
I worked with Jeff on this.? We discovered that COSFROM was set to "usb" instead of "usbinvert"
?
Steve - N8AR
|
Fails Asterisk touch-tone test
I'm having problems with a new Pi-Star 4 and SHARI Pi4U. I purchased the preconfigured SD-Card but it wouldn't open port 222 and could not login to root with any or no password.
?
SO - I built a new SD-Card following the posted instructions. ?It is working EXCEPT when I test audio and touch-tones. ?Using SimpleUSB-Tune-Menu, item 2, I think I see levels (not a solid line), but when I go to the Asterisk CLI to test touch tones, I get the attached errors. ?Pressing any touch tone, I hear the SHARI announce the IP addee, call sign, etc. It receives 1 more tone and stops.
?
KC3YGF
|
I would say yes as I can connect to another fresh node right away. Is there a reconnect to previous node timer?
|
Are you giving it enough time to react?
Would anyone be able to tell me why after connecting my to node another, disconnecting, trying to reconnect, it will not connect. I can only connect to a node 1 time and 1 time only? This happens with Allmon3 and via DTMF. If it is the first time connecting to a specific node it works either way but trying to connect again, nothing.?
|
Would anyone be able to tell me why after connecting my to node another, disconnecting, trying to reconnect, it will not connect. I can only connect to a node 1 time and 1 time only? This happens with Allmon3 and via DTMF. If it is the first time connecting to a specific node it works either way but trying to connect again, nothing.?
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
Michael - you're comparing apples and oranges here.? For ASL3, they've assembled a team of developers who have rewritten things to bring the software to current standards and they are actively fixing bugs that come up in the beta testing process.? Follow in on the GitHub discussions and you'll see the current activity level of continued development.? If you have a previously unreported issue, you can open a GitHub issue and it will be addressed.
|
Re: Shari node not receiving my HT
If you have a spare SD card of the same size or bigger. You could make a mirror image from your working SD card then write the mirror image to a new card and play with it.
We are Ham. If things ain't broken, we are Ham will fix it until it is.....
Good Luck,
73 - Kit
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
Except 2.0 was always ¡°beta¡± and then poof 3 appeared.
?
-Michael
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Rich Hawthorne
Sent: Monday, July 15, 2024 6:41 AM
To: [email protected]
Subject: Re: [SHARI] AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
?
My understanding is that ASL3 is a beta version. When a beta test is released the purpose is to find bugs before final release. I wish people would offer constructive feedback to help improve the quality for final release.
Rich H
|
Re: Shari node not receiving my HT
Hello, Mick
Now this is brilliant. I did it with my hamvoip node with the
Baofeng S888. I can only admit that my mind is not where it should
be.
Thanks for the suggestion and all the best,
73 (Kind regards),
Hendrik (ZS6HBS)
Please visit my QRZ page at
On 7/15/2024 5:31 PM, Teton Amateur
Radio Repeater Association (TARRA) via groups.io wrote:
toggle quoted message
Show quoted text
Hello Hendrik,
Now that you have it working, save a backup image of your SD
card. Then if something goes wrong, you can put it back the way
it was. And if you want to try other things, you can still get
back to where it was. And even better yet, use that backup image
to image another SD card to use and take the one that you have
working right now and put it somewhere that you will be able to
find later if you need it!
Mick - W7CAT
----- Original Message -----
From: "Hendrik Steyn"
To: [email protected]
Sent: Sunday, July 14, 2024 11:57:59 PM
Subject: Re: [SHARI] Shari node not receiving my HT
> It was the carrier (item I) in simple USB configurations
menu. I am too
> scared to fiddle any more and perhaps breaking what isn't
broken...
>
> 73 (Kind regards),
>
(ZS6HBS)
> Please visit my QRZ page athttps://www.qrz.com/db/zs6hbs
>
> On 7/12/2024 3:48 PM, N8AR via groups.io wrote:
> > SHARI PiXX working with "usb" instead of "usbinvert"
for COSFROM is
> > very strange.? Are you referring to CTCSSFROM instead
of COSFROM.?
> > Have you looked at simpleusb.conf to see if it set to
"usb" there?
> >
>
>
>
>
>
>
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
My understanding is that ASL3 is a beta version. When a beta test is released the purpose is to find bugs before final release. I wish people would offer constructive feedback to help improve the quality for final release.
Rich H
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
I caused DTMF decode to fail by having the receive level way toooooo high.....
|
Re: Shari node not receiving my HT
Hello Hendrik,
Now that you have it working, save a backup image of your SD
card. Then if something goes wrong, you can put it back the way it
was. And if you want to try other things, you can still get back
to where it was. And even better yet, use that backup image to
image another SD card to use and take the one that you have
working right now and put it somewhere that you will be able to
find later if you need it!
Mick - W7CAT
toggle quoted message
Show quoted text
----- Original Message -----
From: "Hendrik Steyn"
To: [email protected]
Sent: Sunday, July 14, 2024 11:57:59 PM
Subject: Re: [SHARI] Shari node not receiving my HT
> It was the carrier (item I) in simple USB configurations
menu. I am too
> scared to fiddle any more and perhaps breaking what isn't
broken...
>
> 73 (Kind regards),
>
(ZS6HBS)
> Please visit my QRZ page athttps://www.qrz.com/db/zs6hbs
>
> On 7/12/2024 3:48 PM, N8AR via groups.io wrote:
> > SHARI PiXX working with "usb" instead of "usbinvert" for
COSFROM is
> > very strange.? Are you referring to CTCSSFROM instead of
COSFROM.?
> > Have you looked at simpleusb.conf to see if it set to
"usb" there?
> >
>
>
>
>
>
>
|
Re: Shari node not receiving my HT
It was the carrier (item I) in simple USB configurations menu. I
am too scared to fiddle any more and perhaps breaking what isn't
broken...
73 (Kind regards),
Hendrik (ZS6HBS)
Please visit my QRZ page at
On 7/12/2024 3:48 PM, N8AR via
groups.io wrote:
toggle quoted message
Show quoted text
SHARI PiXX working with "usb" instead of "usbinvert" for COSFROM
is very strange.? Are you referring to CTCSSFROM instead of
COSFROM.? Have you looked at simpleusb.conf to see if it set to
"usb" there???
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
toggle quoted message
Show quoted text
On Sun, Jul 14, 2024, 3:33 PM Brad Kellison N8PC < bradn8pc@...> wrote: Follow the directions on the site. It should have the install docs on them
On Sun, Jul 14, 2024, 10:50 AM Richard Anderson via <koolray_67= [email protected]> wrote: Just tried to do upgrade and I don't have "apt" or "dpkg"
Any help?
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
Tried ASL3 and Allmon3, couldn't get it to work properly. Couldn't send dtmf tones and it would only let my node connect to another node once and once only. Tried with several nodes, same thing. At least Hamvoip worked right off the bat.
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
|
Re: AllStarLink.org - New ASL3 version just released - HUGE upgrade for all Pi & PC versions
Follow the directions on the site. It should have the install docs on them
On Sun, Jul 14, 2024, 10:50 AM Richard Anderson via <koolray_67= [email protected]> wrote: Just tried to do upgrade and I don't have "apt" or "dpkg"
Any help?
|
Steve-N8AR
Jeff Porter (Gypsy)
Brad N8PC
Michael Champion
Hendrik Steyn
Steve Bosshard NU5D