开云体育

I have had real good luck with these. I have one for each of my Pi's https://www.amazon.com/gp/product/B01LAEX7J0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Thank You, Ed Lee KI5WSU 73 wrote: --

These things are happy around 5.2 volts. Most power banks will provide that through USB A or USB C. I'd also look for a battery that has charging passthrough if you want to power the Pi in a vehicle.

What should I be looking for in powerbanks?? 12v 3 amp?

Fred has asked me to post some pictures of his PI-HIAT on a RPI 3A + board with cooling fan. He has also installed a push button shutdown switch.

73, Alan VA3IAH > >

That would appear to be router dependent then, I've done it both ways, and had instances where a single entry won't work.? Try it either way, use what works.

Not all ISP provided routers will allow a range to be entered. Mine forces single entries. It works fine at least but would suck if you needed to open a large range of ports.

Echolink requires one IP per node. Run your AllStar as a -L or -R using your IP directly. The ports are 5198, 5199, and 5200. If you want to use another node on your network, you will need to use one

To stop echolink o clear node rename the echolink.conf to echolink.org

No you do it the way I previously posted or it will not connect properly one echolink entry in the router: Echolink??? 5198-5200?? TCP/UDP?? to the LAN address of your node I have people do it

2 things: 1.? it's a common fallacy that you need to forward TCP 5200.? You don't.? That port is for outbound traffic only (connects to the Echolink servers). 2.? Some routers have bugs that bite

Simple solution:? Use a proxy on KD6CWI, that will resolve the problem.

Allen Many ISP's -primarily the wireless -cellphone based ISP's are what they call "Double NATed" menaing if you open a UDP port, it does not get you out to the "real world" as you ride in the

*Hello Folks - Thanks Scott KB3JQQ, Robert and Adam VA3AUM for the helpful advice!* Yes - by way of context fibre entered the neighbourhood and I took the plunge with Bell (in Ottawa, Canada) and a

Have to test, the SHARI isn't the most sensitive radio. The tone setup is mandatory to avoid disrupting other AllStar users.? On my busier conferences, I will boot poorly configured repeaters if I

The two main points: In modules.conf, make sure that the Echolink module is loaded. load => chan_echolink (change noload to load on that line). Next, configure echolink.conf with your node details

all you have to do is nano echolink.conf file and change the settings. make sure you are set for a -L from echolink and you will have a node number for it. yes there are instructions.

Hello everyone. Just got this email from EchoLink Admin. Seems they had an issue on my EchoLink on my Google Pixel7, also on my Microsoft Surface 5 Laptop and lastly on my ClearNode. Since I am not

Configuring echolink is pretty much identical on both ASL and HamVoIP, however, the echolink module in HamVoIP has lots of memory/code optimization and bug fixes that don't exist on the ASL version,

We use a T-mobile cell connection for internet for our repeater.? The connection is made using an Teltonika RUT 240 industrial cellular modem designed for uncontrolled environments. (we are in a