开云体育

The audio part is (relatively) easy for me to do. I am less good at packaging something like that for easy distribution. I have lots of ideas, and know about half of what I need to make them a

Aint that the truth. I have pulled a lot of things into Audacity and sped up the tempo. I'd gladly pay for someone to develop and release an easy-to-install script that replaced Allison Smith on my

Aint that the truth. I have pulled a lot of things into Audacity and sped up the tempo. -Michael Sent: Saturday, June 15, 2024 7:03 AM To: [email protected] Subject: Re: [SHARI] Changing Callsign to

Hi: The file that plays after Allison slowly and painfully says "I... P... address..." the way she slowly and painfully said everything, before the IP address is spoken, is your normal node ID. If you

Correction: /etc/asterisk/local/node-id.ul You may wish to experiment with different ID files and call them in /etc/asterisk/rpt.conf for a little variety

I recently downloaded the RPi-Z2W-2-3-4_V1.7-01 image to program a Raspberry Pi Zero. The Pi Zero works but I want to make a change. When booting up or when the Pi Zero makes an announcement, the Pi

Yes, you will need to change any reference to 59886 with 598860 You don't need to do an entirely new install of your SHARI to change your node number. Just run admin menu option 3, change the primary

I recently purchased a ClearNode UHF to complement my Shari VHF unit. I went to Allstar to create the node number for the new UHF unit. Allstar change my existing Node for my Shari from 59886 to

My node appears to not 'hear' my HT on an intermittent basis. This issue is relatively new. After setting up the node I was able to use it as expected for several months. Recently when I attempted to

I would suggest go to this group your on [email protected] mailto:[email protected] and download the instructions on how to program your SHARI It includes setting the Pi up for it Les Keegan N4LPK

The SHARI set up procedures which are used with the various SHARI nodes to install the HamVOIP Allstar software are in the Files section of this group.? Version 2.01 of the SA818-prog program which

Did you order it as a complete build or a kit? ________________________________ Sent: Wednesday, May 8, 2024 1:42 PM To: [email protected] <[email protected]> Subject: [SHARI] Program Filq At the risk of

At the risk of sound dumb. Where is the Shari program file? Thank you

Thanks all!!! I am going to try the Shari until I get a separate Pi4b.? I am not going to need the 100's of connections.? Patrick, can you 'splain the sound card addition?? I really need to look at

I would recommend separating hub from radio hardware. The simpleusb usb driver, Supermon/Allmon/Allscan, etc. whatever you want to run on it, takes away from potential for max connections. That's why

The SHARI is not the problem.. there are nodes out are hubs with over 100 nodes and bridges connected to them. One such comes to mind, Blind Hams- ALLSTAR 50631X. X being 0 through I think 6.. I

I have a Shari Pi VHF.? I also have a cloud node up on Vultr.com.? The cloud node is not doing too well and has losses if I get more that a 6 nodes on it.? Anyway, I am thinking about using the VHF

I did not see a topic on this subject. I noticed there is a Macros option which looks like you may be able to add one or two. Is this the maximum list, or how to increase the number to say 5 or 6?

Oh gotcha.. that answers my question perfectly, thank you !

Oh interesting.. Thanks for that Steve !