开云体育

I’ve used mostly longer strips, 16' or so. I have a suspended ceiling, so they went right on the Metal dividing strips between the tiles. I suppose you could use running boards or painters tape on

Hi Bob -- While I agree with your assessments of the LWS kits, at least I didn't have to put up with warping! Resin kits were often more difficult and fragile (brittle) with uneven thicknesses as well

Jeff, Looks like you have all the correct 'boxes' checked for nice even lighting! As in my questioning world, I'm intrigued by the? upright legs (brown!).? Are they temporary saw horses or some

A 3.28 ft. LED strip produces 800 lumens.? A 4 ft. T8 fluorescent tube produces 2850 lumens. How are LED strips to be mounted.? You cannot apply an adhesive strip to your ceiling sheetrock(or

It seems that the photos did not post, so here's another try. Bob Hogan

Anyone who has attempted to build one of the vintage Locomotive Workshop styrene 40' Box Car kits over the past many years knows the problems associated with their building.? These old kits featured

I have decals from Highball in Rock Island, Southern and Central of Georgia. The printing is super sharp. Tom P Alexandria VA

Another simple and inexpensive option are LED light strips. No hardwire, they are plug and Play. They're easily installed since they are tape strips. Color and temperature adjustable just like any

Thanks to Pete Silcox sending me these vintage kits, I was able to build a pair of Don Thompson's early TrainStuff resin kits last week.? The Burlington Northern 50' 6" Flush Plug Door Box Car was

I have installed a 2x2 suspended tile ceiling in the basement(train room).? What I see here appears to be a sheetrock ceiling.? I preferred the suspended ceiling because everything can be accessed

I went with some flush mount 12” round LEDs. The color temperature can be adjusted and they are dimmable. [image0.jpeg] Cheers Jeff Michigan

I bought these last year, like them alot! https://a.co/d/g5QRmuD

As I recall, there was at least one, likely more, article in RPC on Airslides. JGGK ________________________________ Sent: Thursday, April 3, 2025 1:12 PM To: [email protected] <[email protected]>

I have a couple of Airslides to finish.? One will be Milwaukee grey but I am looking for ideas for the other one.? John Mann showed a great Burlington scheme but said he used decals so the car data

PLEASE respond to my post via PM ( personal = private ) emails right here on I o groups s scale website. I am not going to clutter this list further with responses posted here instead of being sent to

For somebody starting new, or if willing to replace fixtures, there are plenty of LED strip types.? They have LED strips inside and not tubes.? They also make new LED fixtures that are tube type if

Thanks to you and Tom Lennon for the idea; I'll take a look at it. JGGK ________________________________ Sent: Wednesday, April 2, 2025 10:00 PM To: [email protected] <[email protected]> Subject: Re:

Bill, From the wording on your box picture, you can also run them on line voltage without a ballast. I replaced some fluorescent tubes in my garage by reusing the existing fixtures, but removing the

Couldn't you use the K4 box car set? It has SP and T&NO initials. Tommy

Jace, Perhaps you've already considered this: could you use some of the lettering from the K4 sheet?? The initials are about 9 scale inches. Charles Weston