开云体育

Gents......... Here is another former bare brass beauty which has been cosmetically improved with the addition of paint, custom decals, crew, decoder (silent), head light, couplers, etc.?

Jim.........With all due respect, gasoline is not the only cost of driving a car.? Ask the IRS.? Things like tires, brakes, oil changes, etc. all wear out due to driving around.? ?The less obvious

As an old skinflint Yankee, I pass up the hotel dining area: there is a Panera perhaps a hundred yards behind the hotel, and a Friendly's not much further. I did treat myself to the banquet (food was

HI Chris. I find Ed's cost estimates somewhat pessimistic. Before I break my estimated costs down, and as one who enjoys driving, a distance of a mere 170 miles is no reason to pass up a chance to

I will not be attending as travel is too difficult for me at my age> Pete Silcox [email protected]> wrote:

This is low tech and old school...get yourself a feather duster. I use one to lift the dust into the air and into the path of my shop vac nozzle. Make sure the vac has a decent filter and loop the

I guess I don't get the hit n run aspect of attending. The selling room is unlike anything else for sure. For me the NASG convention was 99% family reunion. Unfortunately many regular attendees have

For many years I thought of the NASG convention as the hi-lite of my summer and routinely attended.--(then I got old)? I've always enjoyed the tours, the auction, the clinics, sometimes a great meal

So, you are not currently in that business? Any thoughts about getting back in? How is your friend doing with Jackson-Standard Models? Jack

There are also sets of variously sized small tools designed for cleaning keyboards that fit onto standard vacuum hoses. The one I have allows one to adjust the level of suction Michael Fox

Hello Chris and All, Thanks to Jace and Ed for saying positive things about our convention, well, conventions in general, but we're next. One day registration is $30. No NASG membership required. You

Thanks Ted and Chuck? what I've been looking at are much smaller units that are between a 'toy ray gun' and a smaller power drill.? With capacity being only a couple of ounces perhaps.? Dust is

Dale, Thank You very much for your email and the attached magazine info. I won't be attending the convention. Perhaps at another point in time we could get together in order that I could obtain PDF

Hi Chris........ Your question is rather subjective and different folks will have different opinions.? Here is the way I look at it: One night hotel =? $135 Driving cost = $227? (IRS allows 67

I'd say, yes, it is worth it if you are looking for unusual items, usually at good prices. Wednesday night is dealer set up, so Thursday is the first real day for the vendor hall. There is provision

A cheap shop vac (cannister vac), I'm pretty sure, is inherently incapable of being sealed will enough.? Something like that DeWalt 581 is really an entirely different animal from the cheap shop

Hello y'all. Would like to hear from those who have attended in the past, and some comments on the vendor situation/s. I definitely won't be attending on the weekend, if at all, and in fact I'd

Im pretty certain the article was in the NASG magazine. You can probably down load from the members area Colin Stewart Inverness Scotland

Jace:? Andy Mallett wrote an article in one of the magazines (I? do not remember er but possibly I believe S? Scale Resource? on line ? ) about how to rebuild the original F unit drives. After

These are some new to me Reading locos. They are all a lil rough around the edges and need some work. Could not pass up the Oriental SW1 for that price. It is a good 2 footer but has the wrong