¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Keeping kleen!


 

This is low tech and old school...get yourself a feather duster. I use one to lift the dust into the air and into the path of my shop vac nozzle. Make sure the vac has a decent filter and loop the hose over your shoulder so that it doesn't flop onto any delicate layout details. The feather duster can contact quite fine details without harming them.

Jim Martin


On Thu, Jul 4, 2024 at 2:11?PM Michael Fox via <foxmjc=[email protected]> wrote:
There are also sets of variously sized small tools designed for cleaning keyboards that fit onto standard vacuum hoses. ? The one I have allows one to adjust the level of suction?

Michael Fox

On Jul 3, 2024, at 9:10?PM, Charles Kinzer via <ckinzer=[email protected]> wrote:

?
For the Central Coast Model Railroad (part of the San Luis Obispo Railroad Museum) I got a nice Dewalt vacuum.? No, it is not miniature, but kits of smaller accessories are available.

First, none of this seems to be what you are looking for.? I just provide it as some background.

We found the regular cheap Craftsman shop vacs put a LOT of dust back into the air.? If somebody did some vacuuming in one area of the room, trains would not run in that area until the virtually invisible fine dust was cleaned off the rail heads.

It is the DeWalt DCV581H.? It is both corded and cordless and it is VERY handy to just grab it and use it on battery for a quick clean up job.? It is very well sealed and does not spew dust.? This is the vacuum.? You buy the battery and charger separately.



We also bought some brand of automotive detailing attachments that were of small size.? I don't remember what.? DeWalt has one.? I could not find it on Amazon, but maybe it is there.? Here it is at Home Depot.



There are many such kits under "Car Cleaning" or "Automotive" or "Micro" or "keyboard crevice cleaning" attachments.

Of course, this is still a big bulky vacuum, but it will do everything.? You might look at smaller DeWalt offerings that have good filtering in them.

For your need, this is not miniature as what you are looking for, but miniature usually doesn't work very well in my opinion.

If I were looking for something smaller, I might consider this smaller Dewalt.? I have no personal experience, but the reviews suggest it is in a difference class than the $30 vacuums that just don't work very well.



Come to think of it, I may have to get one, try it out, and donate it to the museum railroad as an alternative to the larger DeWalt 581.? Or maybe keep it to replace my nearly useless "Dustbuster.'

It does seem that really good vacuums do cost a bit.? But a lousy vacuum is not very satisfying.

Charles E. "Chuck" Kinzer





On Wednesday, July 3, 2024 at 06:26:03 PM PDT, Bob Werre <bob@...> wrote:


For a lot of years I've been work'in one the railroad, but the heavy work of dealing with the table saws, routers and the like has been reduced and likewise so has the sawdust they caused.? When I built the train-room I used a large red Sears shop vac to great advantage for a lot of that period.? Later a smaller unit was added, then again after that an even smaller unit plus a small carpet type vacuum has helped along the isles.? Now I find myself looking to go even into the sub-miniature class.? Most of my needs are a single hole in a finished area where I'm not wanting to spend the time dealing with hoses, cords, big batteries and misplaced attachments.? Just like a war effort--a surgical strike is called for.

So I've started my search on Amazon, since they always seem to have an overwhelming choice.? What if any, are you Suzie homemakers using!


Bob Werre

PhotoTraxx

Join [email protected] to automatically receive all group messages.