Re: Rail Joiners for S-Helper Flex Track
|
I have same issue.? Been using the O scale 148 joiners, work fine.
Jack
On May 20, 2025 2:21 PM, "Roger Haag via groups.io" <s_scale_man@...> wrote:
Hello
IF ALL ELSE FAILS?
I thought I could use the thin brass U-Shaped scratch building stock. 12inch length. Cut to about 1inch long. ?Buy the stock that has a width that is as wide as the base of the rail. Solderable.
Roger Haag
On May 20, 2025, at 2:00?PM, Steve Lunde <ace5348@...> wrote:
? In a pinch you can use Atlas O joiners for code 148.
Steve Lunde?
On May 20, 2025, at 11:59, John Donnersbach via groups.io <pullmx@...> wrote:
?
Just thought I would ask this group if anyone knows what might work the best for rail joiners, since Fox Valley are Sold Out at this time. I'm looking for Rail Joiners for S-Helper / MTH code 138 Flex Track that will be used with Fox Valley Switches. I
was looking on eBay and found 3 different rail joiners that might work. I want the Silver unpainted ones so I can solder wires to them if needed. [1] Peco PL-10 said they fit HO / O scale code 100 Track, [2] Guy in Florida goes by antbocc_50 has O Scale rail
joiners for code 125 & 148 track, [3] Micro Engineering 26-100 rail joiners. Any suggestions would be appreciated. Thanks John
|
