开云体育

Thank you very much Kevin for this finding regarding the USBAUTO=”false”. It fixes exactly my problem with my Pi4, GPS dongle ublox7 and IC-7300 & 7100 radios for CAT control. Indeed I dont

Here is the Python3 script that I am running on my Pi4. Just install Python3 with libraries and add a line in your crontab so the file runs at boot. Don't forget to enable i2c in rasbpi-config.

How much do you need to backup?? Specific content and you'd just reinstall, or do you want to be able to do a bare metal recovery it stops booting from the SSD?? Simplest is do a full disk

I've been very happy with Deja Dup for my Ubuntu installation. Rather than back up your whole disk, have you considered just backing up your /home? and /usr directories?? In case of disk failure

I have one of those ice tower coolers. Set my Pi4 up over locked to 2.1ghz and let it crunch seti@home before they finally ended the project. CPU never got more than 5 deg C over room temp Lol ?Get

That Pi4 is huge with that cooler on top. The pi4 doesn't need anywhere near that much cooling.? I added a small fan to my Pi4's that were only a few dollars each. The fan is inside the case so you

Just got this running today. 0.96 inch multi line display with tower cooler. This screen runs a python3 script at boot with a cronjob. Here's the link to the kit. YOU have to install all software and

It’s free. Bacula.org, but it’s in the software repo for Debian. Dan -- Sent from my iPhone. Please pardon any mispelings or errors.

Raspberry Pi has a SD card Copier utility under accessories.? I use it to copy to and from the SD card and the SSD. Ken

There's no SD card involved - booting directly from SSD. Clint Bradford

I am afraid of commercial programs that don't have pricing on their Web sites ... (g) Unless they have an educator discount, Bacula may not be the solution for my meager requirements. Sent them a

I had a similar problem and could not get it resolved! I finally re-booted with the monitor connected to the Pi4b and the resolution corrected itself to the desired settings. 73 de Bob K4RCG

Hello all. I have a Pi4b 4gb and I am having problems setting the proper resolution for my monitor. I'm running the NEW 'Bullseye' 64bit and Its super fast but, I can NOT get the Pi to set resolution

I suggest power down your pi, remove sd card to a Windows machine and use SDformater https://www.sdcard.org/downloads/formatter/ to create an .img file. John va3wm

Depends on what you are backing up to, but Bacula has never let me down. Dan — Sent from my iPad. Same errors, more misspelings.

Please suggest a backup method when booting on my Pi 4 from a SSD. "Speed" is not an issue - so creating an image file would be OK - as opposed to just backing up data and docs. Many thanks! Clint

Charles KK4AC Dave Slotter, W3DJS has a software compendium for the Raspberry pi called HamPI. It includes WSJT-X an well as many more ham related programs. It will run on the RPI ? 2 W... ?? His

A very surprising little guy!? Fldigi works properly with a few tweeks on the alsamixer.? Run your USB cable from the Signalink to a port on your multiple USB adapter and you are on. I didn't check

I was able to get it to finally work.? I had the volume up too high for the TNC to decode the packets and that was causing the bad CRCs.? Thank you for your help

It looks like I had a bad flexible window passthrough cable that was shorting.? I replaced it and now the TNC is receiving but it still seems to be unable to decode the data with a bad CRC. Tonight