开云体育

Thanks, and good info to know.? The first release of Slack for ARM started at the 3.x kernel, so I don't think there is a realistic path to getting a 2.6 on bare metal Pi hardware. My Pi-3 running

That is funny you mention that. I have settled on Slackware 13.37 as my AX.25 distro. I also have a R-Pi 3 that I could play with old distros. What R-Pi version would be the equivalent of Slack

Hello, Received Pi5 8Gb?this morning (02/06/2024) via FedEx. Ordered from Sparkfun 09/29/2023 Maybe this will provide/help with a time frame for those who still have units on order. DaveL

Very strange indeed. I pre-ordered a different kit (KIT-23617) as a guest and my order was acknowledged 9-29-2023 at 6:01:59 PM. It was my understanding at the time that the Pi-5 was the only item

https://en.wikipedia.org/wiki/Raspberry_Pi_OS Bookworm / Debian 12 based: kernel: 6.1.73 Bullseye / Debian 11 based: kernel: 6.1.21 Stretch / Debian 9 based: kernel: 4.19.66 Jessie

Hello John, I ordered the Rpi5 "essential" kit ( https://www.sparkfun.com/products/23782 ) on November 9th. That's basically three months later which is NOT great. I chose this kit as I have all

==================== Geekworm have detailed Wikis for their products. The Wiki for the X1202 says the connection from the Pi to the hat is made via “pogo pins”, not the GPIO

Hi David, I'm glad to see SparkFun is shipping 8gb Pi-5's. I am very curious to know when you placed your order and, if you ordered a kit, which kit you ordered. Best regards, John, WoGN

I'm happy to report my Raspberry Pi 5 8GB kit (Rpi board, case w/ fan, and power brick) showed up today so that goes to prove that Sparkfun *is* shipping stuff. --David KI6ZHD

Absolutely! That's called out in the release notes for the images available on rapsberrypi.org site. Pi-2 added January 2015, Pi-3B+ added in March 2018,? Pi-4 added in June 2019,? Pi-5 added in

Hello Jon, Beware of the major caveat that you must use older Raspberry Pi hardware that's compatible with those older OS versions (bootloader / firmware support). Using a Raspberry Pi 3 should be

Be sure to use all the CPU cores... like I did.

I may have to try it on a Pi5 and see what the difference is ?Get BlueMail for Android ?

FYI... it takes 2851 minutes to compile the linux kernel on a Raspberry Pi-1. 47.5 hours.

I'm hoping to have my pimoroni this week. I 3D printed a case that holds the Pi5 with the pineberry pi bottom "hat" and if it doesn't directly fit, I may be able to modify it. ?Get BlueMail for

Hmmm, I might have answered my own question. After looking at a few of the online Pi shops without success, I searched broader and found a couple of 3D cases that should work. This one looks

I plan on adding my Pi 5 to my portable rig. It’s currently caseless, however, as the Pimoroni NVM3 base board doesn’t seem happy in other cases. Anyone know of a case that can accommodate this

2019-06-20-raspbian-buster-lite.img, Pi-3, did not "apt update;apt upgrade", the system is 32bit, will investigate what kernel versions live in the repos later. Linux Pi3-2019 4.19.50-v7+ #896 SMP

When I pick this up again, I'm looking at the 2022-04-04 release of Bullseye, which should have the 5.15.xx kernel.? Buster has a release of 4.19 kernel I'll test also. Describe "works okay" for your

I know I am jumping in late here, but the AX.25 stuff mostly works on kernel version 4.19, and does ok on 5.15 with some patches.? Version 6 just seems to explode.? I am running my linux/AX.25 on an