开云体育

Question for any fldigi / flrig gurus. I installed both on a new Raspberry Pi 5 using the “add /remove software “ available in the GUI. Noticed that my FT-710 wasn’t supported, further

Hello Jim, You need to install the required dependency packages and then compile the Direwolf 1.8-DEV (not 1.6) meaning the DEV branch of Direwolf:

Thanks, David, for the information. I have compiled direwolf 1.6 according to the steps listed in the PDF you provided a link to. However, I didn't get the "Includes optional support for: libgpiod"

Another option is downgrading the kernel to 6.1.74 which was the last kernel with the deprecated GPIO. A lot more software will be affected for GPIO access and this fix will fix it for all sudo

Hello Jim, A recent Raspberry Pi OS upgrade made many disruptive changes including deprecating the old way of interfacing to the GPIO pins. To resolve this for Direwolf you need to compile a new

I think this is the same issue.? Might give it a try on Debian version: 11 (bullseye). https://github.com/wb2osz/direwolf/issues/503 Hope this helps...

I'm getting an error when I try to use direwolf with GPIO configured for PTT. I'm running Raspberry Pi OS on a Pi 2B. Raspberry Pi OS with desktop and recommended software Release date: July 4th

?Steve G8EBM? </g/RaspberryPi-4-HamRadio/message/15761#>? Steve G8EBM 6:18am #15761??? </g/RaspberryPi-4-HamRadio/message/15761> Sent: 09 July 2024

Thanks for your help Spence. What is strange is that today, after the pi-5 was set aside over night, I seems to work fine. I was able to get your Email and am about to send this on the Pi-5. I hope

________________________________ Sent: 09 July 2024 4:28 To: [email protected] <[email protected]> Subject: [RaspberryPi-4-HamRadio] email email to verify

Try opening a terminal windows and typing - ifconfig This should show you your network settings. I can almost guarantee that you will be missing IPV4 address but have IPV6. If so then you will

Definitely odd. I've seen that wit WiFi before, but not Ethernet ?Get BlueMail for Android ?

Ethernet Links: ------ [1] https://bluemail.me [2] http://groups.io [3] http://netins.net [4] /g/RaspberryPi-4-HamRadio/message/15757 [5] /mt/107202779/1275392 [6]

Wifi or Ethernet? ?Get BlueMail for Android ?

Using an 8GB pi-5 with NVme & SD card Problem with network?? Can someone figure out what is wrong from this, the only clue I found? If I hold down the shift key and use key to reformat the SD card and

email to verify

The RWS project allows anyone using an HF radio and a computer to access the internet from anywhere if needed, either because of an emergency or if you simply go somewhere that doesn't have

Hey Bill, Glad we could help. There are also a bunch of .tcl files associated with the PHP web stuff. They are located in /usr/share/svxlink under events.d and modules.d I seem to remember having

The touch command followed by remove-purge fixed the problem and I’ve been able to install all of the updates. Thanks for your help!

Hi Gregg, You conf file example helped me figure it out. Apparently, the web interface in NOT updating the TIMEOUT value in the port setup. I manually edited the file and set the timeout to 15,