开云体育

Sheesh haha this group … David have you found a 5a PD USB C yet I have not found one yet - thanks for the tip on the POE hat it’s not 13v but interesting - I could link you to the details I was

Thanx!! Jerry

here's the link to the model for the pi5 with pineberry bottom drive HAT case https://www.thingiverse.com/thing:6382978 wrote:

And it also fits with the Raspberry pi active cooler on it as well ?Get BlueMail for Android ?

A standard 5V 5A supply to the USB-C is all that is needed.? The pi foundation finally added PD to the USB-C input so other supplies such as laptop supplies that support PD could be used.? In the

POE standards aren't set by the pi foundation. It is an international standard for POE.? The only thing specific to the pi is pin location, and that was published before the Pi5 ever reached the

Would you be able to share a link to that .stl file?

Then he needs a buck converter. There are a ton of Amazon.? Inexpensive, handle the current needed etc ?Get BlueMail for Android ?

There isn't anything commercially available, but I found the STL (3D model) of one and 3D printed it myself.? Works perfectly! ?Get BlueMail for Android ?

Look on ebay for a "buck converter." 12 volt to 5 volts. I run my raspberry in my rv. (TARRA) <tarra@...> wrote:

I don’t own an RPi5. I assumed 5VDC at 5A was sufficient. I had not seen any mention of PD until Kelly’s post at 1407; must have missed that previously. I’ll shut-up and go away now. 73 de

No Mick. He's now saying USB-C or a HAT. He's moved the goalposts.

Steve The pi5 needs PD USBC Are you injecting to the rail on a pi5 today woth success Im currently using the top HAT pins and the PoE standards haven’t been published yet please detail you seem

12V-24V DC Car Charger Auto Power Supply Cable - DC 5.5mm x 2.1mm 4FT to Car Cigarette Lighter Male Plug Car Cigarette Lighter Cable amzn.toand UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter

Is it really that difficult to understand what he is asking for??? He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle. Mick - W7CAT

Good morning John. The short answer is No. The Geekworm 9 layer acrylic case (P-394 A or B) will provide side protection for the RPI5 / active cooler but will need to be modified with spacers to allow

Hi Ed, I have the BOT Pineberry card I received in late December, but I'm still awaiting the 8gb Pi-5 kit I ordered in September from SparkFun. Have you found a case yet that works with the Pi-5 and

That's significantly moved the goalposts. Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@... www

Ideally it’s a HAT direct or via USB C Nigel

https://www.aliexpress.com/w/wholesale-5A-buck-regulator.html?spm=a2g0o.best.search.0 Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701,