Re: Pineberry Pi SSD HATs
|
here's the link to the model for the pi5 with pineberry bottom drive HAT case
On Sat, Jan 27, 2024 at 1:44?PM Jerry Rector - K4OAM < kb4oam@...> wrote: Would you be able to share a link to that .stl file?
There isn't anything commercially available, but I found the STL (3D model) of one and 3D printed it myself.? Works perfectly!
Get
On Jan 27, 2024, at 08:07, John < radio@...> wrote:
Hi Ed,
I have the BOT Pineberry card I received in late December, but I'm still awaiting the 8gb Pi-5 kit I ordered in September from SparkFun.
Have you found a case yet that works with the Pi-5 and BOT together?? I would like one that encloses the sides and bottom of the BOT with openings for cooling.
Have you seen such a case yet?
Best regards,
John,? WoGN
On 2023-12-27 14:32, Edward Seeliger wrote:
[Edited Message Follows] Thanks David.
After I posted my question I searched again and found a review of the Pineberry Pi boards posted yesterday on Toms Hardware by Les Pounder that shows a picture of the Bottom Board connected to the RPI5. Yes, the mount for the SSD requires removal from the RPI5 board. Another problem is the SD card slot is hidden by the PCIe connecting cable between the RPI5 and the Bottom Hat. To change / remove the SSD card you must also remove the Bottom Hat from the RPI5.
I am looking for a case to mount the RPI5 / Bottom Board in to protect the SSD - I have two on order from Amazon arriving tomorrow to try. - They are both simple top / bottom plexiglass with standoffs.
Thanks again.
Happy New Year.
Edd - KD5M
|
